Draper Portable Dust/Chip Extractor - 55L - 750W

Empty the collection bag frequently, ideally when it is about two-thirds full, to maintain optimal suction and prevent reduced performance.

Remove the filter bag and gently tap it to remove dust. For heavier cleaning, you can use a soft brush. Avoid washing the filter bag with water, as this may damage it.

Disconnect the hose from both the extractor and the woodworking machine. Use a flexible rod or similar tool to dislodge the blockage.

Warranty information is not available in the product data, please refer to the product documentation or contact the manufacturer for specific warranty details.

While designed primarily for wood chips and shavings, it may collect other similar debris. However, it's not recommended for liquids, metal fragments, or very fine dust as it may damage the filter or the motor.

The extractor requires a 230V power outlet.

The extractor is suitable for workshop or DIY environments. It may be used in light-duty commercial settings, but for heavy-duty commercial use, consider a more robust extractor.

Check the power connection and ensure the plug is securely inserted into the outlet. Verify that the power switch is in the on position.

Empty the collection bag and clean or replace the filter bag. Check the hose for any blockages or damage.

Ensure the collection bag is properly sealed and in good condition. Check for any tears or damage to the filter bag and replace if necessary.