Gira Flush Mount Installation Box - 289200
Best current price£7.98from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£7.98Visit shop Gira 2-Gang Flush Mount Installation Box E2 E22 - 289200
Visit shopTameson UK£7.98Visit shop One Offer
1 offer from £7.98
View price history by clicking the chart icon.
Tameson UKGira 2-Gang Flush Mount Installation Box E2 E22 - 289200
Free delivery in 1–3 days
£7.98
Visit shop
Product Information
Full details
The Gira 289200 flush-mounted installation box is a professional-grade hardware solution designed for electricians and contractors installing electrical outlets in brickwork walls or ceilings. Its primary benefit is providing a sturdy, secure foundation for Gira E2 and E22 range devices, ensuring a clean, flush finish. One caveat for installers is that it requires precise mounting with plaster, necessitating careful preparation before final installation to ensure the box remains level and flush with the surface.
All features
| Model Part Number | 289200 |
|---|---|
| Brand | Gira |
Extended Product Information
FAQs
Can this box be used in drywall?
No, the 289200 is specifically engineered for masonry and brickwork applications.
What is the internal depth of this box?
The internal depth is 50mm, providing sufficient room for standard wiring.
Which Gira ranges are compatible with this box?
It is designed for use with the Gira E2 and E22 product ranges.
Does it come with mounting screws?
Yes, it features integrated screw mounts for a secure installation into the wall structure.
How many cable entries does it support?
It supports up to 4 cable entries for flexible wiring management.
Troubleshooting
Box is not sitting flush with the wall surface
Adjust the depth of the masonry cutout or apply additional plaster behind the mounting tabs to push the box forward.
Difficulty feeding cables through entry points
Ensure the cable entry membrane is fully cleared of debris and use a fish tape to guide wires if the conduit path is tight.
Pros and Cons
Pros
- High-quality, durable plastic construction
- Spacious 50mm internal depth
- Supports multiple cable entry points
- Precision-engineered for Gira E2 and E22 series
Cons
- Requires professional plastering for installation
- Limited to brickwork mounting surfaces
- Installation requires specific Gira accessory knowledge
Setup, Compatibility & Care
To install the 289200, first mark the exact location on the brickwork and use a masonry hole saw or chisel to create the necessary aperture. Ensure the depth allows the edge of the box to sit perfectly flush with the final plaster finish. Secure the box using the integrated screw points.
Compatibility is strictly limited to the Gira E2 and E22 design ranges. It is recommended to use the Gira 289700 device box as an accessory for specific setups. For care, avoid using harsh chemical cleaners on the internal components; if dust or debris enters the box during construction, clear it out with compressed air or a soft brush before installing the socket modules.