This Feather Edge Fence Board, made from treated wood, is designed for durability and a traditiona...This Feather Edge Fence Board, made from treated wood, is designed for durability and a traditional aesthetic. It measures 1.8 meters in length, 125mm in width, and 11mm in thickness. The "feather edge" refers to the board's tapered design, making it ideal for building strong, long-lasting fences. It is pressure treated for enhanced durability.
This guide is for homeowners and contractors looking to install a durable and aesthetically pleasing fence. The Snowdon Timber Feather Edge Fence Board offers a traditional look with enhanced longevity due to its treated wood construction. Keep in mind that while pressure-treated, regular maintenance will extend the lifespan of your fence.
All features
Colour
Brown
Model Part Number
Fe111256T10
Brand
Snowdon Timber
Extended Product Information
FAQs
How long will the fence boards last?
The lifespan of the boards depends on the maintenance and environmental conditions. With proper care, they can last for many years.
Can I paint or stain the boards?
Yes, you can paint or stain the boards. Allow the boards to dry completely after installation and before applying any finish.
What type of fixings should I use?
Use fixings designed for treated wood. These are typically galvanized or stainless steel screws or nails to prevent corrosion.
How do I clean the fence boards?
You can clean the boards with a mild soap and water solution. Avoid using harsh chemicals or pressure washers.
What is the benefit of the feather edge design?
The feather edge design allows the boards to overlap, adding strength and creating a visually appealing effect.
Are the boards suitable for a sloped garden?
Yes, the boards can be used on sloped gardens. Proper planning and post installation will be necessary to ensure the fence follows the terrain.
Troubleshooting
Boards are warping or twisting.
Ensure boards are installed correctly with proper spacing and fixings. Check for any moisture build-up and address the source.
Wood is splitting.
Pre-drill holes when screwing near the ends of the boards. If splitting persists, use different fixings or a slightly thicker board.
Fence is unstable.
Check the fence posts for stability. Ensure posts are correctly set in the ground. Add more support if needed.
Pros and Cons
Pros
Durable due to pressure treatment.
Traditional, attractive aesthetic.
Easy to install.
Tapered design adds strength to the fence.
Cons
Requires regular maintenance to ensure longevity.
May require cutting to fit specific fence designs.
Wood is susceptible to damage.
Setup, Compatibility & Care
Preparation: Before you begin, gather all necessary tools, including a saw, measuring tape, level, posts, and fixings. Ensure the ground is prepared and any old fence posts have been removed.
Post Installation: Install the fence posts, ensuring they are level and set at the appropriate distance apart. The distance will depend on the length of the fence boards and desired spacing.
Board Installation: Start at the bottom, overlapping each board by a small amount to create the feather edge effect. Use nails or screws to secure the boards to the fence posts.
Compatibility: Compatible with standard fence posts and fixings. Ensure you use appropriate screws or nails for treated wood to prevent corrosion.
Care: Regularly inspect the fence for any signs of damage or wear. Clean the boards as needed and consider applying a wood treatment, such as a stain or sealant, every few years to protect against weathering. Remove any debris that accumulates on the fence.