2 Pack Outdoor Wall Lights - Loops - Silver

Yes, the 12W E27 bulb is not included with the lights and must be purchased separately.

The specific detection range is not detailed, but PIR sensors typically cover a wide angle and a reasonable distance, sufficient for most outdoor entryways and pathways.

These lights have an IP44 rating, which means they are protected against solid objects larger than 1mm and water splashes from any direction. While suitable for general outdoor use, they are not designed for direct shower or high-humidity indoor environments like bathrooms.

Adjustment options for sensitivity, duration, and lux (ambient light detection) depend on the specific model's integrated controls. Refer to the product manual for detailed instructions on how to access and adjust these settings.

The lights use a standard E27 bulb fitting. LED bulbs are highly recommended for energy efficiency and longevity.

Dimmability depends on the bulb used. If you install a dimmable E27 bulb, and your existing electrical wiring supports dimming, the lights can be made dimmable.

Warranty information is typically provided by the manufacturer or retailer at the point of sale. Please check your product packaging or receipt for specific warranty details.

Verify that the power supply is connected and switched on. Check the E27 bulb is correctly screwed in and functional. Ensure the circuit breaker for the lighting circuit has not tripped.

Ensure the sensor is clean and free from obstructions. Check that the PIR sensor is properly aligned to cover the desired area. The ambient light setting might be too high, preventing activation during daylight; adjust as necessary. Ensure the bulb is functional.

Check the sensitivity and duration settings on the PIR sensor, if adjustable. Ensure there are no constant heat sources or moving objects (like trees swaying) near the sensor that might trigger it continuously. Resetting the sensor by briefly cutting power may resolve temporary glitches.

Clean the affected area with a soft cloth and mild, non-abrasive cleaner specifically designed for stainless steel. Rinse and dry thoroughly. Avoid exposure to salt spray if located near coastal areas.