MagMod Dome Gel - Full CTO

A Full CTO (Color Temperature Orange) gel is used to convert the color temperature of cooler light sources (like electronic flashes or daylight-balanced LEDs) to a warmer, more orange hue that matches tungsten lighting (around 3200K). However, in this specific MagMod product, it's described as balancing artificial light with *natural daylight*, implying it's used to correct cooler artificial light to match warmer daylight or to warm up an overly cool daylight simulation.

Yes, the MagMod Dome Gels are designed to be stackable, allowing for more precise color control and creative effects by combining different gels.

For the most secure and intended fit, it is recommended to use the MagMod Reflector XL or Mag Box Pro. The gel's design is optimized for these systems.

The product description states it is 'virtually indestructible,' indicating a high level of durability for professional use.

The 'Full' strength provides the maximum color correction for CTO. 1/2 CTO and 1/4 CTO provide progressively less warming effect, allowing for finer adjustments.

While designed to balance artificial light with natural daylight, its primary function is to alter the color temperature *of* the artificial light. If shooting in bright sunlight, you would typically adjust your camera's white balance to the sunlight. This gel is most useful when your artificial light source's color temperature differs significantly from the ambient light you want to match or simulate.

Ensure you are using the 'Full CTO' and not a lighter CTO variant if your goal is to match daylight. Verify the gel is fully seated and not obstructed. Check your camera's white balance settings; sometimes manual adjustment is needed.

Confirm you are using a compatible MagMod Reflector XL or Mag Box Pro. Ensure there is no debris on the modifier's gel slot or the gel itself. The gel should click into place.

Try stacking another Dome Gel (like a 1/4 CTO or 1/2 CTO) for more adjustment, or consider if a different type of correction gel is needed for the specific lighting scenario. Ensure your camera's white balance is set correctly or use a custom white balance.