Tap and Die Set - 40pc Alloy Steel
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 40-piece alloy steel tap and die set from US PRO is designed for DIYers, mechanics, and machinists who need to create or repair threads. Its key benefit is providing a comprehensive range of both UNF (Unified National Fine) and UNC (Unified National Coarse) thread sizes in a durable alloy steel construction, along with a pitch gauge for accurate measurement. A potential caveat is that while it covers many common sizes, it may not include every specialized or metric thread size for advanced industrial applications.
All features
| Model Part Number | US2510 |
|---|---|
| Brand | us pro |
Extended Product Information
FAQs
What does UNF and UNC mean?
UNF stands for Unified National Fine, which has more threads per inch for a given diameter, allowing for finer adjustment. UNC stands for Unified National Coarse, which has fewer threads per inch, making it stronger and faster to thread.
How do I determine the correct tap or die size?
The size is usually stamped on the side of the tap or die. You can also use the included pitch gauge to measure the threads per inch (TPI) and compare it to the set's specifications.
Can I use this set on hardened steel?
This set is designed for general-purpose threading on softer metals, plastics, and wood. It is not intended for use on hardened steel, which would require specialized tools and techniques.
What is the purpose of the pitch gauge?
The pitch gauge is used to measure the distance between threads (pitch) or the number of threads per inch. This is crucial for identifying the correct tap or die to match an existing thread or to ensure you are using the correct size for your project.
Do I need cutting fluid?
Yes, using cutting fluid or oil is highly recommended. It lubricates the cutting edges, reduces friction and heat, helps clear chips, and extends the life of the tap and die, while also producing cleaner threads.
How should I store the set?
Store the set in its original case. Ensure all pieces are clean and dry before storage. Applying a light coat of oil can prevent rust and corrosion, especially in humid environments.
Troubleshooting
Tap or die not cutting threads cleanly
Ensure the correct size and pitch are being used. Apply cutting fluid or oil. Check that the tool is held perfectly perpendicular to the material. For taps, back it out a quarter turn every few turns to break the chip.
Tool slips or is difficult to turn
Verify that the workpiece material is suitable for the tool. Ensure the tap wrench or die stock is securely gripping the tool. Apply more cutting fluid. If tapping a blind hole, ensure it is deep enough.
Threads are cross-threaded
This usually occurs when starting a thread. Back the tool out completely, clean the starting point, and try again, ensuring perfect alignment before applying pressure.
Pros and Cons
Pros
- Comprehensive set with both UNC and UNF thread sizes.
- Durable alloy steel construction for long-term use.
- Includes a useful pitch gauge for accurate thread identification.
- Organized storage case for easy transport and access.
- Suitable for a variety of common threading applications.
Cons
- May not cover all specialized or metric thread sizes.
- Primarily suited for general repair and creation, not heavy-duty industrial use.
- Requires basic knowledge of threading tools for effective operation.
Setup, Compatibility & Care
Setup: Ensure you have the correct tap or die for the desired thread size and pitch (UNC or UNF). Select the appropriate handle or tap wrench. For taps, insert the tap into the wrench and secure it. For dies, place the die into the die stock and tighten. Always ensure the tool is held perpendicular to the workpiece for straight threads.
Compatibility: This set is compatible with standard tap and die handles and wrenches. It is designed for use on metals, plastics, and wood where threads need to be created or repaired.
Care: After each use, clean the taps and dies with a wire brush to remove debris. Apply a light coat of oil or rust inhibitor to prevent corrosion, especially if stored for extended periods. Store all pieces back in the original case to maintain organization and protect the cutting edges.