Dylon Hand Dye - Peony Pink

This dye is ideal for natural fabrics such as cotton, linen, wool, and silk. It is not suitable for synthetic materials like pure polyester, acrylic, nylon, or fabrics with special finishes.

Yes, you will need 250g of ordinary salt, which is essential for the dye to fix properly to the fabric. You'll also need rubber gloves, a large bowl or sink, and warm water.

One 50g pack can dye up to 250g of dry fabric to its full shade. For larger amounts of fabric, the colour will be lighter, or you may need to use additional dye packs.

The ideal water temperature for the dye bath is approximately 40°C (warm water).

The active dyeing process involves 15 minutes of continuous stirring, followed by 45 minutes of regular stirring. This is then followed by rinsing and washing.

The final colour will always be a mix of the dye colour and the original fabric colour. For example, using Peony Pink on a blue fabric will result in a purplish shade. For the truest Peony Pink, start with white or very light-coloured fabric.

Yes, when used according to the instructions, Dylon Hand Dye provides a strong, permanent colour that will withstand washing.

Ensure the fabric weight does not exceed 250g per 50g dye pack. Check that you added the full 250g of salt, as salt is crucial for dye uptake. Verify the water temperature was maintained at 40°C. Also, consider the original colour of the fabric; dyeing over a dark or non-white fabric will alter the final shade.

Thorough and consistent stirring is key. Ensure you stirred continuously for the first 15 minutes and regularly for the remaining 45 minutes. Also, make sure the fabric was fully submerged and untangled in the dye bath throughout the process.

Confirm that your fabric is a natural fibre (wool, silk, cotton, linen). Dylon Hand Dye is not compatible with synthetic materials like polyester, acrylic, or nylon, or fabrics with special finishes. Ensure the fabric was thoroughly washed and left damp before dyeing.

Always wear rubber gloves when handling the dye. Read all safety warnings on the packaging before use. If skin contact occurs, wash immediately with soap and water. Keep the dye out of reach of children.

After the initial cold water rinse until clear, always wash the newly dyed item separately for the first few washes. This helps remove any last traces of unbound dye and prevents it from transferring to other garments.