M12 5-Pin Sensor Actuator Cable - 3m - 1669835

A-coding on M12 connectors is typically used for standard sensor/actuator applications, including DC 3-wire sensors. It ensures correct pin assignment and prevents accidental connection with different coding types (like B, D, or X).

Halogen-free cables, like this PUR one, do not release toxic and corrosive gases when burned, making them safer for environments where fire safety is critical and reducing damage to equipment in the event of a fire.

Yes, you can cut the cable to a shorter length. However, you will need to properly terminate the new free end, ensuring secure and insulated connections. The M12 connector end is fixed.

The cross-sectional area of the individual conductors is 0.34 mm², which corresponds to approximately 22 AWG.

This cable is suitable for demanding industrial environments due to its robust, oil-resistant, and halogen-free PUR jacket. It can withstand temperatures from -40 °C to 80 °C.

Typically, for a 5-position cable used with sensors/actuators, the standard pinout is: Pin 1 (Brown) for +VDC, Pin 2 (Blue) for 0V/GND, Pin 3 (Black) for signal, and Pins 4 & 5 (White/Gray) may be used for additional signals or communication depending on the specific application. Always consult the documentation for the connected sensor/actuator.

Yes, this cable is shielded to protect against electromagnetic interference, ensuring reliable signal transmission in electrically noisy environments.

Verify the M12 connection is secure. Check the wiring at the free cable end for correct connections and continuity using a multimeter. Ensure the connected device is powered and functioning correctly.

Ensure the M12 connector is fully tightened. Inspect the cable for any physical damage. Confirm the shielding is properly grounded at the termination point. Check for sources of strong electromagnetic interference near the cable.

Ensure the M12 connector is properly aligned before attempting to screw it in. Do not force the connection. Check for debris in the connector or receptacle. For detachment, ensure the coupling nut is fully loosened.

While PUR is durable, continuous, high-stress flexing may eventually cause fatigue. Ensure the cable is properly supported and not subjected to excessive bending radius. Consider a cable specifically designed for continuous motion if applicable.