Masterplug TES7 7 Day Electronic Plug Timer - TES7-MP

Press the 'Clock' button, and then use the 'Hour' and 'Minute' buttons to set the current time. Press the 'Day' button to set the current day of the week.

Press the 'Prog' button to enter programming mode. Use the 'Hour' and 'Minute' buttons to set the desired on and off times. Use the 'Day' button to select the days of the week. Repeat for each schedule you want to set.

The Masterplug TES7 allows you to set up to 10 different on/off schedules.

The countdown function allows you to set a specific time for the device to operate. After the set time elapses, the device will automatically turn off.

Refer to the manual for specific instructions on activating the random function. This feature will vary the on/off times slightly to simulate occupancy.

The maximum load capacity is specified on the device itself and in the product documentation. Make sure your device does not exceed this capacity to avoid damage to the timer or the device.

The Masterplug TES7 typically comes with a standard manufacturer's warranty. Check the product packaging or documentation for the specific warranty period.

Unplug the timer from the power outlet for a few minutes. This should reset the internal settings. You may need to reprogram your schedules after resetting.

Check that the timer is plugged into a working outlet. Verify that the device is correctly plugged into the timer. Ensure the timer is programmed with the correct time and schedule. Confirm that the override switch (if applicable) is not engaged.

Ensure the timer is receiving power. Try resetting the timer by unplugging it for a few minutes and then plugging it back in.

Double-check the time and schedule settings. Ensure you have correctly set the day, hour, and minute for each programmed event. Consider resetting the timer and reprogramming it.