Shopping.co.uk

Milwaukee Finish Nails - 16 Gauge - Galvanised - 45mm - Silver

Milwaukee Finish Nails - 16 Gauge - Galvanised - 45mm - Silver

Milwaukee Finish Nails 16G 20deg Galvanised SC1 45mm. Suitable for M18 CN16GA, M18 FN16GA. Collate...

Best current price£37.61from Amazon

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £37.61

View price history by clicking the chart icon.

AmazonMilwaukee Pin Nails 16G 20° Sc1 Galvanised 45 2000-4932492584
Free delivery in 1–3 days
£37.61
Visit shop

Product Information

Full details

This guide is for contractors and DIY enthusiasts using Milwaukee cordless nailers for interior finishing work. The key benefit is the reliable performance of these galvanised 16-gauge, 45mm nails, ensuring a secure hold for trim, moulding, and cabinetry. A potential caveat is their suitability primarily for Service Class 1 environments due to galvanisation. These nails are collated at a 20-degree angle, designed for specific Milwaukee M18 nailer models, and come in a pack of 2000.

All features

ColourSilver
Model Part Number4932492584
BrandMilwaukee

Extended Product Information

FAQs

Are these nails suitable for exterior use?

No, these nails are galvanised for Service Class 1 (dry interior) environments. For exterior or high-moisture applications, stainless steel nails are recommended.

What Milwaukee nailer models are compatible with these nails?

These 16-gauge, 20-degree collated nails are designed for Milwaukee M18 CN16GA and M18 FN16GA cordless nailers.

How many nails are in a pack?

Each pack contains 2000 Milwaukee finish nails.

Can I use these nails with a non-Milwaukee brand nailer?

While they might fit mechanically, optimal performance and jam reduction are guaranteed only with the specified Milwaukee M18 models due to the precise collation angle and design.

What does 'SC1' mean?

SC1 refers to Service Class 1, indicating the nails are suitable for use in dry interior environments where there is minimal risk of corrosion.

Can these nails be painted over?

Yes, the galvanised finish can be painted over after proper surface preparation, allowing for a seamless finish with your project.

Troubleshooting

Nails not feeding into the gun

Check that the nail strip is correctly seated in the magazine and that no debris is obstructing the feeder. Ensure the correct nail collation angle (20-degree) is being used.

Nails not driving fully

Verify the nailer's depth adjustment is set correctly. Check the battery charge on your M18 nailer; low power can affect driving force. Ensure you are using the specified nail length and gauge for your tool.

Misfires or jams

Inspect the nailer's nosepiece for any bent or broken nails. Clear any obstructions. Ensure you are using genuine Milwaukee nails designed for your specific model.

Rust spots on nails after driving

This can occur if the galvanised coating is damaged during driving or if exposed to moisture. For critical applications, consider stainless steel nails. Ensure proper storage.

Pros and Cons

Pros

  • Reliable feeding and driving in compatible Milwaukee nailers.
  • Galvanised coating offers moderate corrosion resistance for interior use.
  • Consistent nail length and thickness for predictable results.
  • Large pack quantity offers good value for extensive projects.

Cons

  • Limited corrosion resistance; not suitable for exterior or high-moisture environments.
  • Requires specific Milwaukee M18 nailer models for optimal performance.
  • 20-degree collation angle may not be compatible with all nailer types.
  • Galvanised finish can sometimes be less smooth than electro-galvanised options.

Setup, Compatibility & Care

Compatibility:

  • These nails are specifically designed for use with Milwaukee M18 cordless nailers, including models M18 CN16GA and M18 FN16GA.
  • Ensure your nailer's magazine is set to accept 20-degree collated nails.
  • The 16-gauge size and 45mm length should be confirmed against your nailer's specifications.

Loading the Nailer:

  1. Ensure the nailer is unloaded and de-pressurized (if applicable).
  2. Open the nailer's magazine.
  3. Insert the strip of nails, ensuring the angled heads align correctly with the feeder mechanism.
  4. Close the magazine securely until it clicks.

Care:

  • Store nails in their original packaging in a dry environment to prevent premature corrosion of the galvanised coating.
  • Keep the nailer's magazine clean and free of debris to ensure smooth nail feeding.
  • Avoid exposing nails to excessive moisture after they have been driven into wood.

Similar items

Milwaukee Finish Nails - 16 Gauge - 50mm - SilverFrom £37Inpress Onyx Rectangular Front Bath Panel - (H)56Cm (W)169CmFrom £105VidaXL Garden Raised Bed Powder-coated Steel - 260x40x68 cm GreyFrom £57DeWalt Galvanised Staples - 25mm - 5000 PackFrom £14B2C Window Box Flower Pot Planter - White Large 58CmFrom £16Halcyon By Stelrad K2 Compact Double Panel Radiator - 600mm X 1000mm - WhiteFrom £60VidaXL Gabion Wall with Covers - 300x30x100 cm - SilverFrom £117KitchenCraft Deluxe Cast Iron Griddle - GreyFrom £28Wheelie Bin Cover Storage Quad - AnthraciteFrom £800Azur Emilia Electric Designer Radiator - WhiteFrom £205Composite Balustrade Hand Rail and Spindle Kit - GreyFrom £117Stelrad Softline Compact K1 Radiator - 600 x 1000mm - WhiteFrom £119

Price History

DatePrice
Visit shop