Best current price£97.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£97.75Visit shop B&Q - Ener J Rgb Cct Cob Led Strip Light 5 Metre Roll With Power Supply And Remote Controller
Visit shop1 offer from £97.75
View price history by clicking the chart icon.
The ENER-J 24V RGB+CCT COB LED Strip Light is designed for users seeking versatile and high-quality ambient lighting for indoor residential and commercial spaces. Its key benefit is the ability to provide smooth, dot-free illumination with a wide spectrum of colors and adjustable white temperatures, all from a single strip. A potential consideration is its 24V DC operation, which requires a compatible power supply.
| Colour | Multicolor |
|---|---|
| Brand | ENER-J |
COB (Chip-on-Board) technology integrates multiple LED chips directly onto a flexible circuit board, covered by a uniform silicone layer. This eliminates the gaps between individual LEDs, resulting in a continuous, smooth, and dot-free light beam, ideal for ambient and accent lighting applications.
Yes, the ENER-J LED strip can be cut to size. There are designated cutting marks along the strip, typically indicated by a scissor icon or a copper pad. The cutting length for this specific model is 41.6mm.
You need an RGB+CCT LED controller that is compatible with 24V DC operation. This controller will allow you to manage both the RGB colors and the adjustable white color temperatures (CCT).
RGB (Red, Green, Blue) controls the mixing of these three primary colors to create a vast spectrum of colors. CCT (Correlated Color Temperature) controls the shade of white light, ranging from warm white (e.g., 2700K) to cool white (e.g., 6500K), allowing you to adjust the 'warmth' or 'coolness' of white light.
The strip consumes approximately 21 watts per meter at its maximum output.
No, this LED strip has an IP20 rating, which means it is designed for indoor, dry environments only and offers no protection against moisture or water.
The 2oz (double-ounce) copper thickness in the flexible printed circuit board allows for better conductivity, improved heat dissipation, and helps in balancing voltage drop across longer runs, contributing to the strip's longevity and consistent performance.
Verify that the 24V DC power supply is connected correctly and providing adequate power. Check all wiring connections for proper contact and polarity. Ensure the controller is functioning and properly connected to the strip and power.
Check all connections between the strip segments and the controller. Ensure the power supply is stable and sufficient for the strip length. If using long runs, check for voltage drop and consider a 24V power supply with higher wattage or adding a signal amplifier.
Inspect the specific section of the strip for any physical damage. Check the cutting points for clean connections. If the issue persists across a segment, it may indicate a faulty section requiring replacement.
Confirm the power supply's wattage is sufficient for the entire length of the strip. Check the controller's brightness settings. Excessive cable length or thin gauge wires can cause voltage drop, reducing brightness; consider thicker gauge wires or a closer power supply.
Setup:
Compatibility:
Care:
