Best current price£12.49from eBay
Shopping.co.uk recommended and popular offers
eBay£12.49Visit shop Raspberry Pi Camera Module V2 – 8MP Sony IMX219 Sensor New
Visit shop
B&Q£14.29Visit shop - Okdo Raspberry Pi Camera Module 2
Visit shop2 offers from £12.49 - £14.29
View price history by clicking the chart icon.
The Raspberry Pi Camera Module V2 is an essential imaging tool for hobbyists, educators, and engineers looking to add high-definition sight to their Raspberry Pi projects. It offers high-quality still and video capture capabilities via a dedicated CSI interface, making it ideal for computer vision, security monitoring, and time-lapse photography. While it provides excellent integration for diverse electronic prototypes, users should note that it requires a ribbon cable connection to the specific CSI port on the board rather than a USB connection.
| Model Part Number | RPI CAMERA V2 |
|---|---|
| Brand | Raspberry Pi |
It is compatible with all Raspberry Pi models that feature a CSI (Camera Serial Interface) port, including Pi 3, 4, and 5.
The standard V2 module includes an IR filter for color accuracy in daylight. For night vision, you would need the 'NoIR' version of the module paired with an infrared light source.
The official libcamera stack is the recommended interface for current Raspberry Pi OS versions, though older legacy commands like raspistill are still available.
No, the Raspberry Pi Camera Module V2 does not include a microphone; you will need a separate USB or I2S microphone for audio capture.
Yes, you can use a longer compatible ribbon cable, but performance may degrade if the cable is excessively long or shielded poorly.
No, the CSI interface is proprietary to Raspberry Pi hardware. You would need a CSI-to-USB bridge adapter to use it on a standard PC, though this is not natively supported.
Check that the ribbon cable is fully seated in the CSI port with the metal contacts facing the correct direction and ensure the interface is enabled in raspi-config.
The V2 lens is fixed focus; ensure your subject is at least 50cm away. If you need macro shots, physical adjustment of the lens housing may be required.
You may be using the NoIR version of the module. Ensure you are using the standard V2 module for daylight photography or adjust white balance settings in your software.
To set up the camera, locate the CSI port on your Raspberry Pi (positioned between the HDMI and audio ports on most models). Gently pull up the edges of the plastic clip, insert the ribbon cable with the silver contacts facing toward the HDMI port, and press the clip down firmly. Ensure your Raspberry Pi is powered off during installation. Once connected, enable the camera interface using the `sudo raspi-config` utility under 'Interface Options'. For care, avoid touching the lens surface to prevent oil buildup and ensure the ribbon cable is not bent at sharp angles to avoid connection failure.
