Best current price£2.99from Homebase
Shopping.co.uk recommended and popular offers
Homebase£2.99Visit shop Autobar Pack Of 30 Male Blade Connectors Red
Visit shop
The Range£2.99Visit shop Autobar Pack Of 30 Male Blade Connectors - Red
Visit shop5 offers from £2.99 - £9.80
View price history by clicking the chart icon.
The Autobar 240B Male Blade Connectors are essential components designed for automotive electrical repairs, catering to both professional mechanics and DIY enthusiasts looking for reliable, secure connections. These 5-amp terminals provide a dependable way to manage vehicle wiring systems, ensuring consistent electrical flow for various upgrades. However, users should be aware that these are specifically rated for 5-amp circuits, meaning they are not suitable for high-current applications like heavy-duty starter motors or high-wattage amplifiers.
| Model Part Number | 240B |
|---|---|
| Brand | Autobar |
Yes, these are designed for standard 12V automotive electrical systems.
No, these are rated for 5 amps. Using them on a 15-amp circuit will cause the connector to overheat and potentially fail.
While soldering can add extra security, these are designed to be crimped. A high-quality crimp is sufficient for most automotive applications.
These are intended for standard automotive primary wire, typically between 18 and 22 gauge.
These are standard metal male blade terminals and are generally non-insulated, requiring the user to provide their own heat-shrink or electrical tape for insulation.
Ensure you are using the correct size mating female terminal. If the issue persists, the female terminal may need to be slightly tensioned with needle-nose pliers.
Check the crimp quality. If the wire can be pulled out, the terminal must be re-crimped or replaced with a new connector.
Clean the terminal with a contact cleaner or fine-grit sandpaper, and apply dielectric grease to protect the surface from future moisture exposure.
To install, strip approximately 1/4 inch of insulation from your wire, insert the wire into the rear of the connector, and use a dedicated terminal crimping tool to secure the wings over the copper conductor. Ensure the crimp is tight enough to resist a firm pull test. These connectors are compatible with standard female blade receptacles found in most automotive fuse blocks and aftermarket harness kits. To ensure longevity, keep the connection area clean and free of moisture. If the connection will be exposed to the elements or high humidity, it is recommended to apply a small amount of dielectric grease or cover the connection with heat-shrink tubing to prevent oxidation.
