A high-performance neutral cure silicone sealant specifically designed for use with roofing produc...A high-performance neutral cure silicone sealant specifically designed for use with roofing products, both modern and traditional, internally and externally. Bond It FLASH-MATE is a low modulus, neutral cure, fast-skinning roof sealant designed to stop weather ingress, tile lift, and noise. It is used to seal or bond dissimilar materials to prevent weather ingress and can be used to bond glass and glazing plastics, as well as small sections of roofing materials under repair. It is ideally suited for sealing rooflights, conservatories, soffits, glass houses, industrial roofing systems, and lead flashings.
This guide is for anyone using Bond It Flash Mate Lead Roofing Sealant - Grey to seal and bond roofing materials. The key benefit is its high-performance, weather-resistant sealing capabilities for both modern and traditional roofing applications. Be aware that proper surface preparation is crucial for optimal adhesion.
All features
Colour
Grey
Model Part Number
BDLEAD
Brand
Bond it
Extended Product Information
FAQs
What materials can Bond It Flash Mate Lead Roofing Sealant be used on?
It can be used on a wide range of materials including lead, glass, glazing plastics, and other roofing materials.
Is this sealant suitable for both internal and external use?
Yes, Bond It Flash Mate is designed for both internal and external roofing applications.
How do I clean up the sealant?
Clean tools and any excess sealant immediately after use with a suitable solvent.
What is the skinning time?
The skinning time is fast, allowing for quick sealing and weather protection. Refer to the product data sheet for specific details.
How should I store the sealant?
Store in a cool, dry place, away from direct sunlight.
Can this sealant be painted?
It is generally not recommended to paint over silicone sealants, however, consult the product data sheet for specific information.
What is the shelf life of Bond It Flash Mate?
The shelf life is typically 12 months from the date of manufacture when stored in the original unopened packaging.
Troubleshooting
Sealant is not adhering properly.
Ensure the surface is clean, dry, and free of contaminants. Roughen smooth surfaces if necessary.
Sealant takes too long to cure.
Check the temperature and humidity. Ensure adequate ventilation. The cure time can vary depending on environmental conditions.
Sealant is discolored or has cracks.
Check the product's expiration date. Ensure proper application techniques were followed. Overexposure to UV light may cause discoloration.
Pros and Cons
Pros
Excellent weather resistance.
Bonds to a wide range of materials.
Fast-skinning for quick application.
Flexible and accommodating to movement.
Suitable for both internal and external use.
Cons
Requires proper surface preparation for optimal adhesion.
May not be suitable for all types of plastics.
Color range is limited to Grey.
Specific application techniques are needed for best results.
Setup, Compatibility & Care
Surface Preparation: Ensure surfaces are clean, dry, and free from loose materials, dust, and grease. Use a suitable cleaner if necessary.
Application: Apply the sealant using a caulking gun. Apply a continuous bead to the joint or area to be sealed.
Tooling: Tool the sealant to the desired finish within the skinning time. This ensures proper adhesion and a neat appearance.
Compatibility: Bond It Flash Mate Lead Roofing Sealant is compatible with most common roofing materials, including lead, glass, and glazing plastics. Always check the product data sheet for specific compatibility information.
Care: Store in a cool, dry place. Avoid contact with skin and eyes. Ensure good ventilation during application. Clean tools immediately after use with a suitable solvent.