Door Handles With Lock - AFIT - Silver

These handles are suitable for most standard internal and external wooden doors, provided they have the necessary pre-drilled holes for a door handle set and a mortise for the sash lock.

Basic tools such as a screwdriver (Phillips head is common), a measuring tape, and a saw (for cutting the spindle) are typically required. A drill may be needed if pre-drilling is necessary.

Insert the spindle through the lock mechanism on one side. Place the handle on the spindle on the same side. Measure the distance from the outside of that handle's rose to the outside of the opposite rose, accounting for the thickness of both handles. Trim the spindle to this measurement, ensuring a tight fit without being overly compressed.

Yes, the included heavy-duty sash lock is designed for use on both interior and exterior doors, offering a secure latching mechanism.

Use a soft, damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive materials that could damage the finish. Always dry thoroughly after cleaning.

Please refer to the product packaging or manufacturer's website for specific warranty information, as it can vary.

This product is sold as a set including handles and a specific sash lock. While individual components can sometimes be sourced, it is designed to be used as a complete system for optimal performance.

Ensure the spindle is correctly sized and the screws attaching the handles to the spindle are fully tightened. Check that the backplates are flush against the door.

Verify that the sash lock is installed straight and the adjustable keep is aligned correctly. Lubricate the lock mechanism with a graphite-based lubricant if necessary.

Adjust the position of the strike plate on the door frame, or adjust the anti-rattle keep on the sash lock itself to ensure proper alignment.

Check that the internal spring mechanism within the handle is not obstructed and that the spindle is not binding. Ensure the spindle is not too long, causing interference.