Best current price£7.99from Joybuy
Shopping.co.uk recommended and popular offers
Joybuy£7.99Visit shop Anycubic Blue Joybuy X Pla Basic Printing Filament, 1Kg Spool, 1.75Mm Diameter, ±0.02Mm Tolerance
Visit shop3 offers from £7.99
View price history by clicking the chart icon.
The ANYCUBIC PLA Basic Printing Filament in blue is designed for both 3D printing hobbyists and professionals who require a dependable, high-quality material for FDM printing. Its primary strength lies in its tight tolerance and consistent flow, which significantly reduces the risk of nozzle clogs and extrusion issues. While it offers excellent layer adhesion and minimal warping, users should note that as a PLA material, it is not suitable for high-heat environments or outdoor applications requiring high durability.
| Brand | ANYCUBIC |
|---|
The ideal printing temperature range for this PLA is 190°C to 210°C.
While a heated bed is not strictly required for PLA, setting it to 50°C-60°C significantly improves success rates and adhesion.
It is compatible with most FDM printers that use 1.75mm filament and have a standard nozzle assembly.
Store in a cool, dry place in an airtight bag or container with desiccant to prevent moisture absorption.
Yes, it is made from renewable resources and is biodegradable under industrial composting conditions.
PLA is not recommended for outdoor use as it has low heat resistance and may warp or degrade under prolonged direct sunlight.
Adjust the retraction distance and speed settings in your slicer software.
Clean the print bed with isopropyl alcohol and ensure the first layer height is properly calibrated.
The filament has likely absorbed moisture; dry the spool in a filament dryer or dehydrator.
Check the printer's nozzle for partial clogs and verify that the extruder gear tension is correct.
This filament is compatible with most standard FDM printers that utilize 1.75mm diameter materials. For best results, set your nozzle temperature between 190°C and 210°C, and ensure your print bed is leveled correctly. Always use a clean print surface to prevent adhesion issues. To maintain the quality of the filament, store the spool in an airtight container or a vacuum-sealed bag with desiccant packets when not in use. PLA is hygroscopic, meaning it absorbs moisture from the air over time, which can lead to popping sounds during printing or a decline in surface quality. If the material becomes brittle or shows signs of moisture, drying it in a filament dryer at 45°C for 4 to 6 hours is recommended.
