Best current price£181.12from RS Components Ltd- UK
Shopping.co.uk recommended and popular offers
RS Components Ltd- UK£181.12Visit shop Eaton EasyE4 Series Control Relay, 100 → 240 V ac/dc Supply, Digital, Relay Output, 8-Input, Digital Input
Visit shop4 offers from £181.12 - £535.98
View price history by clicking the chart icon.
The Eaton EasyE4 Logic Module is designed for automation engineers and technicians needing a flexible control solution. Its key benefit is expandable functionality with Ethernet connectivity, allowing for remote monitoring and control. A caveat to note is its IP20 rating, making it unsuitable for environments requiring high ingress protection against dust or water. This module offers 8 digital inputs and 4 digital relay outputs, supporting TCP/IP and MODBUS protocols, and features a built-in timer.
| Brand | Eaton |
|---|
The maximum switching current for the relay outputs on the Eaton EasyE4 Logic Module is 8A.
No, with an IP20 protection rating, this module is designed for indoor, protected environments and is not suitable for applications exposed to dust, moisture, or harsh weather conditions.
The Ethernet port supports protocols such as TCP/IP and MODBUS.
The EasyE4 module can be mounted on standard DIN rails, walls, or directly with front build-in capability.
The module operates on a supply voltage of 100 - 240 V AC and 110 - 220 V DC. For cULus certification, the DC voltage range is 100 - 110 V DC.
Yes, the Eaton EasyE4 series is designed to be expandable, allowing for the addition of more I/O modules as needed.
Yes, this basic device features an integrated timer for time-dependent control sequences.
Verify that the supply voltage is within the 100-240V AC or 110-220V DC range and that all power connections are secure. Check the circuit breaker or fuse for the power source.
Ensure the Ethernet cable is properly connected. Check the IP address and network configuration settings for both the EasyE4 and the connected network device. Verify that the protocols (TCP/IP, MODBUS) are correctly configured.
Confirm that the input voltage is within the module's operating range for digital inputs. Check wiring to the input terminals and ensure the correct input type (e.g., sourcing/sinking) is being used as per the wiring diagram.
Check that the output is being triggered by the logic program. Verify that the connected load does not exceed the 8A switching current limit. Ensure wiring to the relay output terminals is correct.
Setup: Mount the EasyE4 module on a DIN rail, wall, or directly using its front build-in feature. Connect power to the designated terminals (100-240V AC or 110-220V DC). Wire digital inputs and relay outputs to the screw terminals according to your circuit diagram. For Ethernet connectivity, connect an Ethernet cable to the RJ45 port and configure network settings (IP address, subnet mask) via the programming software or front panel interface if available.
Compatibility: The module supports standard industrial control protocols like TCP/IP and MODBUS, ensuring compatibility with various PLCs, HMIs, and industrial networks. Ensure your power supply is within the specified voltage ranges.
Care: Keep the module clean and free from dust and debris. Use a dry or slightly damp cloth for cleaning; avoid solvents. Ensure adequate ventilation around the module, especially if installed in a control panel with other heat-generating components. Regularly check terminal connections for tightness.
