Bristan Capri Basin Pillar Taps - Silver

Bristan typically offers a Secure Fix Guarantee, which is a lifetime guarantee against manufacturing defects for their taps, subject to correct installation and maintenance.

Yes, these taps are suitable for use with combination boilers provided the water pressure meets the minimum requirement of 0.1 bar.

Typically, the tap on the left is for hot water and the tap on the right is for cold water. Check for any visual indicators or markings if present.

Yes, Bristan usually offers replacement parts for their taps, including ceramic disc cartridges and handles. You can check the Bristan website or contact their customer service for specific part numbers.

Pillar taps have separate controls for hot and cold water, each requiring its own hole. Mixer taps combine hot and cold water through a single spout, controlled by one or two levers/handles.

Use a soft, damp cloth and mild, non-abrasive soap. Rinse thoroughly and dry with a soft cloth to prevent water spots. Avoid abrasive cleaners and scouring pads.

This usually indicates an issue with the ceramic disc valve. Turn off the water supply, remove the handle, and check the disc for debris or wear. If worn, the valve may need replacing. Ensure it is correctly seated.

Check the aerator (if present) for blockages and clean it. Also, inspect the flexible hoses or pipework for kinks or blockages. Ensure the stopcocks supplying the taps are fully open.

Tighten the metal back nuts located underneath the basin. Ensure they are securely fastened to prevent movement.

The ceramic disc valve might be stiff due to limescale buildup or debris. Turn off the water supply, remove the handle and cartridge, and clean the components. Lubrication with a silicone-based grease may help.