Two Fussy Blokes Roller Refills - 2" (50mm) - 4 Pack

You will need a standard 2-inch (50mm) mini roller frame to use these refills.

No, these roller refills are specifically designed for water-based paints, primers, and topcoats. Using them with oil-based paints is not recommended and may damage the microfibre nap.

For the smoothest finish, ensure your surface is well-prepared and clean. Load the roller evenly, avoid overworking the paint, and apply with consistent, light pressure. Consider a final 'dry' coat with minimal pressure to pick up any slight imperfections.

Yes, these roller refills are designed to be cleaned and reused multiple times, provided they are properly cared for after each use. Thorough cleaning and drying are essential for longevity.

The 5mm microfibre nap is engineered to hold and release paint evenly, resulting in an ultra-smooth, low-texture finish that minimizes roller marks and achieves a spray-like appearance, especially on detailed surfaces.

While they are best suited for smooth surfaces, they can be used on lightly textured surfaces. However, for heavily textured walls or ceilings, a roller with a longer nap would generally be more appropriate.

Each pack contains four (4) roller refills.

Ensure the roller is fully saturated with paint but not overloaded. Check that the surface is properly prepared and free of dust or debris. Try applying paint with consistent pressure and direction.

This can happen with new rollers. Ensure you have rinsed and gently squeezed out loose fibers before use. If shedding persists, the roller may be damaged or of poor quality; try a new refill.

Verify that you are using a standard 2-inch (50mm) mini roller frame. Ensure the roller refill is pushed fully onto the frame's spindle and is not obstructed.

Reduce the amount of paint loaded onto the roller. Apply paint with lighter, more controlled strokes. Ensure you are not applying excessive pressure, which can force paint out unevenly.