Dryzone System - Cream

Dryshield Cream acts as a breathable, salt-resistant water-repellent primer for Drygrip Adhesive, a key part of the Dryzone System.

Apply evenly using a brush or roller, ensuring complete coverage of the surface. Follow the instructions on the product packaging for best results.

Dryshield Cream is designed for use on walls affected by rising damp and contaminated with salts. It is most effective on masonry walls and should be used as part of the Dryzone System.

Drying times can vary depending on environmental conditions (temperature, humidity), but it generally takes several hours to dry completely. Always refer to the product instructions for specific drying times.

Improper preparation can affect the performance of Dryshield Cream. The cream may not penetrate the surface effectively, reducing its ability to protect against rising damp and salts.

Wear appropriate protective gear, such as gloves and eye protection. Avoid contact with skin and eyes. Ensure adequate ventilation during application. Refer to the product's safety data sheet for detailed information.

Please consult local hardware stores or online retailers to find Dryzone System - Cream.

Ensure the surface is properly prepared and free from surface treatments that could prevent penetration. You may need to remove any coatings, and lightly abrade the surface before application.

This may indicate the presence of residual salts. Ensure that the Dryzone cream was applied correctly, and consider a second application or consult a professional.

Use a good quality brush or roller and apply evenly. Avoid applying too much cream at once, as this can lead to uneven coverage. Refer to the manufacturer's instructions for the correct application rate.