TIMco Annular Ringshank Nails - Silver

Annular Ringshank refers to the nail's shank which has multiple horizontal rings. These rings cut into the wood fibers as the nail is driven, creating a much stronger grip and significantly increasing resistance to pull-out compared to smooth shank nails.

Service Class 2 relates to timber construction where the moisture content is moderate. It typically covers timber that is protected from the weather but may experience occasional wetting, such as in certain roof spaces or well-ventilated underfloor areas. It is not suitable for direct exposure to weather.

Yes, they are suitable for outdoor applications within Service Class 2, meaning they can be used where they are protected from direct weather but may encounter occasional dampness. For constant exposure to rain or harsh outdoor conditions, a higher level of corrosion protection (e.g., stainless steel) would be recommended.

A 2.50kg pack contains approximately 230 nails, based on TIMco's standard 1kg approximation.

Yes, they can be driven with a standard hammer. However, they are often used with pneumatic nail guns for faster and more consistent driving in construction settings.

Sherardising is a dry galvanising process where zinc diffuses into the surface of the steel at high temperatures, creating a durable, uniform coating. It generally offers good corrosion resistance for its thickness and is less prone to flaking than some wet galvanising methods.

Ensure you are using the correct driving angle and force. If using a nail gun, check the pressure settings. Consider pre-drilling pilot holes if driving into very dense hardwood, though this is rarely necessary with these nails.

Verify that the annular rings are fully embedded in the timber. Ensure the timber is sound and not rotten. For critical structural joints, consider using longer or thicker fasteners if appropriate.

This indicates the nails have been exposed to moisture or a corrosive environment beyond their intended Service Class 2 rating. For applications requiring higher corrosion resistance, select stainless steel or heavily coated fasteners.