Best current price£34.89from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£34.89Visit shop Us Pro Tools Air Metal Nibbler Punch Shear Sheet Cutter With Spare Blades 8230
Visit shop2 offers from £34.89
View price history by clicking the chart icon.
This US PRO Tools Air Metal Nibbler is designed for professionals and serious DIYers who need to cut sheet metal efficiently. Its key benefit is providing clean cuts through its punch and shear action. A potential caveat is the requirement for specific air tool connections. This tool offers a stroke rate of 3800spm and can cut up to 1.2mm of steel, making it a capable option for various fabrication tasks.
| Model Part Number | 8230 |
|---|---|
| Brand | us pro |
The US PRO Tools Air Metal Nibbler 8230 is designed to cut steel up to 1.2mm thick.
The tool requires a 1/4'' air inlet.
A minimum of 3/8'' inner diameter (ID) air hose is recommended for adequate air flow.
Yes, the package includes a spare die and blade.
While primarily designed for steel, it can likely cut other soft metals like aluminum or sheet copper within a similar thickness range, but always test on a scrap piece first. Always ensure the metal is within the tool's general capacity.
It is recommended to lubricate air tools regularly, typically at the beginning of each use or after several hours of operation, following the specific guidance for air tool lubricants.
Check air pressure and flow rate to ensure it meets the tool's requirements. Inspect the die and blade for wear or damage and replace if necessary. Ensure the metal being cut is within the specified 1.2mm steel capacity.
Inspect all connections for tightness. Check seals and O-rings for damage and replace any worn components. Ensure the tool housing is securely fastened.
This could indicate insufficient air supply. Verify your air compressor's output and hose diameter. Allow the compressor to build pressure if it has been depleted.
Setup: Connect the nibbler to your air compressor using a suitable 1/4'' air inlet fitting. Ensure your air hose has a minimum 3/8'' inner diameter (ID) for sufficient air volume. Always disconnect the air supply before performing any maintenance or adjustments.
Compatibility: Requires a compressed air source capable of providing consistent pressure and volume. Compatible with standard workshop air compressors.
Care: Regularly lubricate the tool according to manufacturer recommendations for air tools. Keep the cutting die and blade clean and free of debris. Store in a dry environment. Inspect the tool for wear and tear, replacing the die or blade if significant dulling or damage occurs.
