The Bosch GSB 12V-35 Professional Combi Drill features a compact design for optimum handling and w...The Bosch GSB 12V-35 Professional Combi Drill features a compact design for optimum handling and working in tight spaces. Its Electronic Cell Protection prevents overload, overheating, and deep discharge. The drill driver also includes a 2-gear system, Autolock, charge level indicator, and Electronic Motor Protection. It boasts the best power-to-size ratio in Bosch's 12V category, with 30Nm of hard torque and speeds up to 1,300 rpm. This drill is compatible with all Bosch Professional 12V batteries and chargers.
Specifications:
Chuck Capacity: 10mm
No Load Speed: 0-380/0-1,300/min
Impact Rate: 19,500/bpm
Torque (Soft/Hard): 15/30Nm
Torque Settings: 20+1
Max. Screw Diameter: 7mm
Max. Drilling Diameter: Wood 19mm, Steel 10mm, Masonry 10mm.
This guide is for professionals and DIY enthusiasts who need a compact and powerful drill for various tasks. The Bosch GSB 12V-15 offers a great power-to-size ratio, allowing for efficient work in tight spaces. Keep in mind that the maximum screw diameter is 7mm, so it's best for smaller screws.
All features
Model Part Number
GSB 12 V-15
Brand
Bosch
Extended Product Information
FAQs
What is the chuck capacity?
The chuck capacity is 10mm.
What kind of batteries does it use?
It uses Bosch Professional 12V batteries.
What is the maximum screw diameter?
The maximum screw diameter is 7mm.
Does it have a hammer function?
Yes, it has an impact rate of 19,500 bpm for masonry work.
What is the torque?
It has a soft torque of 15Nm and a hard torque of 30Nm.
What materials can I drill into?
You can drill into wood (19mm max), steel (10mm max), and masonry (10mm max).
How do I change the gear?
There is a gear selector on the top of the drill to switch between two speeds.
What does Electronic Cell Protection (ECP) do?
It protects the battery from overload, overheating, and deep discharge.
Troubleshooting
Drill does not turn on.
Check if the battery is properly inserted and charged. Ensure the battery is compatible with the drill. If the battery is fully charged and the drill still doesn't turn on, check the power switch.
Drill loses power quickly.
The battery may need to be replaced. Check the battery's charge level. The battery could be old or damaged and not holding a charge.
Drill bit is slipping.
Tighten the chuck to ensure the bit is securely held in place. Check the bit for damage or wear and replace if necessary. Use the correct bit for the material you are drilling.
Pros and Cons
Pros
Compact and lightweight design for easy handling.
Powerful performance with 30Nm of hard torque.
Durable with Electronic Cell Protection.
Versatile with a 2-gear system.
Compatible with a wide range of Bosch 12V batteries and chargers.
Cons
Limited to a 10mm chuck capacity.
Maximum screw diameter is 7mm.
Impact rate may not be suitable for heavy-duty masonry work.
Setup, Compatibility & Care
Setup: Attach the appropriate drill bit or screwdriver bit to the chuck. Ensure the bit is securely locked in place by tightening the chuck.
Compatibility: This drill is compatible with all Bosch Professional 12V batteries and chargers. Ensure you use the correct voltage battery for optimal performance.
Care: Regularly clean the drill to remove dust and debris. Wipe down the exterior with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Store the drill in a dry place when not in use. Check the drill bits for wear and tear and replace them as needed.