CED CFL Security Light Lamp 118mm - R7s
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This CED CFL Security Light Lamp is designed for homeowners and facilities managers seeking a cost-effective and energy-efficient replacement for traditional 300W tungsten halogen floodlight bulbs. Its key benefit is significant energy saving and a long lifespan, reducing both electricity bills and maintenance frequency. A key consideration is ensuring your existing fixture uses an R7s 118mm fitting and is rated for 220-240V. This lamp offers a direct fit for many J118 flood lighting fixtures, providing comparable illumination with lower power consumption.
All features
| Model Part Number | CFL500 |
|---|---|
| Brand | CED |
Extended Product Information
FAQs
Is this bulb suitable for enclosed fixtures?
While it's a direct replacement, it's best to check the fixture's specifications. Enclosed fixtures can sometimes generate more heat, which might affect the lifespan of any bulb. This CFL is rated for standard use and may perform optimally in fixtures with adequate ventilation.
How does this 24W bulb compare to a 300W halogen?
The 24W CFL provides equivalent light output to a 300W tungsten halogen bulb, meaning it illuminates with similar brightness but uses significantly less energy.
What does 'R7s 118mm' mean?
R7s refers to the type of base, and 118mm is the length of the bulb itself. This specific size and base type are crucial for compatibility with your existing floodlight fixture.
Can I use this bulb in a 120V system?
No, this bulb is designed exclusively for 220-240V systems and will not function correctly or safely in a 120V system.
How long does it take for the bulb to reach full brightness?
CFL bulbs typically take a short period, often between 30 seconds to 1 minute, to reach their maximum brightness after being switched on.
What is the warranty period for this lamp?
Please refer to the product packaging or the retailer's information for specific warranty details, as these can vary.
Can this bulb be used outdoors?
Yes, it is suitable for outdoor use, typically in floodlight fixtures designed for security or area illumination. Ensure the fixture itself is rated for outdoor conditions.
Troubleshooting
Bulb does not turn on
Verify the power is on at the switch/breaker. Ensure the bulb is correctly seated in the R7s holder. Check that the fixture is compatible with 220-240V and the bulb's wattage. Try the bulb in a different compatible fixture if possible.
Flickering light
This can sometimes occur with CFLs. Ensure a stable power connection. If flickering persists, the bulb may be nearing the end of its life or there might be an issue with the fixture itself. Contact support if the issue is constant.
Bulb seems dim
CFL bulbs may take a minute to reach full brightness. Ensure the bulb has had sufficient time to warm up. Check that the fixture's reflector (if present) is clean and not obstructing light.
Pros and Cons
Pros
- Significantly reduces energy consumption compared to equivalent halogen bulbs.
- Long operational life of up to 8000 hours, lowering maintenance costs.
- Easy installation as a direct replacement for existing halogen bulbs.
- Lower running costs due to reduced electricity usage.
- Environmentally friendly due to lower energy demand.
Cons
- Requires a specific R7s 118mm fitting; not a universal bulb.
- Initial purchase price may be higher than a standard halogen bulb.
- CFL technology may take a moment to reach full brightness.
- Only compatible with 220-240V systems.
- Physical dimensions (118mm x 60mm x 46mm) must be checked against fixture space.
Setup, Compatibility & Care
Setup:
- Ensure the power to the light fixture is turned OFF at the switch or breaker.
- Allow the old bulb to cool completely if it was recently in use.
- Carefully remove the old R7s 118mm bulb from the fixture.
- Insert the new CED CFL lamp, ensuring the R7s pins are securely seated.
- Turn the power back ON.
Compatibility:
- Voltage: This bulb is designed for 220-240V systems ONLY. Do not use in lower voltage systems.
- Base Type: Requires an R7s 118mm lamp holder.
- Dimensions: Check that the bulb's dimensions (approx. 118mm height, 60mm width, 46mm depth) fit within your fixture.
Care:
- Always turn off power before cleaning.
- Wipe the bulb gently with a dry or slightly damp soft cloth. Avoid abrasive cleaners or excessive moisture.
- Ensure the fixture remains clear of debris that could impede ventilation.