Best current price£8.72from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£8.72Visit shop APEM IBR3SAD600 Pushbutton Switch, Red, Snap-In
Visit shop11 offers from £8.72 - £14.64
View price history by clicking the chart icon.
The APEM IBR3SAD200 is a compact, snap-in pushbutton switch designed for easy panel mounting in applications requiring a reliable Off-On control. It offers IP54 sealing for protection against dust and splashes, making it suitable for moderately demanding environments, though its primary caveat is the 100mA switching current limit, which restricts its use in high-power circuits. Key features include a maintained/momentary action, silver (gold-plated) contacts, and a durable design.
| Series | IB |
|---|---|
| Model Part Number | IBR3SAD200 |
| Brand | APEM |
IP54 sealing indicates that the switch is protected against dust ingress (sufficiently to prevent malfunction) and splashing water from any direction. It is not waterproof and should not be submerged.
No, the APEM IBR3SAD200 has a maximum switching current of 100mA (0.1A) and is only suitable for low-power electronic circuits or signal control. Using it for high-power loads will cause failure.
Momentary action means the switch is active only while the button is pressed. Maintained action means the switch stays in its activated state (On) after being pressed and requires another press to return to the Off state.
The switch features 2.8mm flat plug connectors. You can use compatible crimp connectors or solder wires directly to the pins. Soldering requires a temperature of 320 ºC for 3 seconds.
The switch has a mechanical durability rating of 1,000,000 cycles and an electrical lifespan of 500,000 cycles under specified conditions.
No, the actuator color is fixed at black for this specific model (IBR3SAD200).
The minimum operating temperature for this switch is -40 °C.
Verify that the switch is correctly wired according to the SPST Off-On configuration. Check for secure connections at the terminals. Ensure the connected device's power requirements do not exceed the switch's 100mA rating.
Check the soldering or crimp connections for integrity. Ensure the contacts are clean and free from debris. If the switch has been exposed to harsh conditions, the internal contacts might be compromised; consider replacement.
Ensure the panel thickness is within the specified 0.5 mm to 4 mm range. Check if the panel cutout diameter is correct (12 mm). Re-seat the switch firmly to engage the snap-in clips fully.
Verify that the switch has not been subjected to electrical loads or environmental conditions beyond its specifications (e.g., exceeding 100mA, 48V DC, or 125V AC). The electrical lifespan is rated at 500,000 cycles; heavy use may lead to wear.
Setup:
Compatibility:
Care:
