Knipex High Leverage Combination Pliers - 180mm

High leverage pliers provide significantly more force at the cutting jaws and gripping surfaces for a given amount of hand force, making tough tasks easier and requiring up to 35% less effort compared to standard combination pliers.

Yes, these pliers are VDE tested to 10,000V and insulated for working on live lines up to 1000V AC and 1500V DC, provided the insulation is intact and the user follows safety protocols.

These pliers are rated to cut hard wire up to a diameter of 2.5mm.

These are 'high leverage' combination pliers, meaning they offer greater mechanical advantage for cutting and gripping. They also feature specific VDE insulation for electrical safety, which standard combination pliers typically lack.

Regularly inspect the handles for any damage (cuts, cracks). Clean them with a damp cloth and dry thoroughly. Avoid exposing them to harsh chemicals or excessive heat, which could degrade the insulation.

Yes, the gripping zones on the jaws are designed to securely hold both flat and round materials, including screws and bolts, though they are not a replacement for specialized wrenches.

The cutting edges are induction-hardened to approximately 63-64 HRC, ensuring they remain sharp and durable for cutting various types of wire.

The joint may need lubrication. Apply a small amount of light oil to the pivot point and work the pliers back and forth.

Ensure you are not exceeding the maximum cutting capacity for hard wire (Ø 2.5mm) or piano wire (Ø 2.0mm). Check for any nicks or damage on the cutting edges. If damaged, professional sharpening or replacement may be necessary.

Discontinue use immediately if the insulation is cracked, cut, or damaged, as this compromises safety when working with live electricity. Replace the pliers to ensure safe operation.

Clean the gripping surfaces to remove any oil, dirt, or debris. Ensure the jaws are aligned correctly; if they are bent, the pliers may need professional servicing.