Best current price£10.42from Joom
Shopping.co.uk recommended and popular offers
Joom£10.42Visit shop Joom Andoer Gray 4 In 1 E27 Base Socket Light Lamp Bulb Holder Adapter
Visit shop2 offers from £10.42 - £210.05
View price history by clicking the chart icon.
The Andoer 4-in-1 E27 adapter is designed for photographers, videographers, and creators who need to increase the light output of a single standard light fixture. It allows you to mount four E27 bulbs into one socket, offering a maximum capacity of 800W for professional-grade illumination; however, users should be mindful that bulbs exceeding 80mm in diameter may not fit properly when all four sockets are in use.
| Brand | Andoer |
|---|
Yes, but the dimming must be handled by the bulbs themselves or a compatible external dimmer, as the adapter switches are simple on/off toggles.
No, it plugs into any standard E27 light socket found in most homes and studios.
While the adapter is lightweight, you should ensure your light stand or ceiling fixture is rated for the combined weight of the adapter and four bulbs.
Yes, as long as each bulb does not exceed 200W and the total wattage does not exceed the capacity of your wall socket or fixture.
This product is intended for indoor use only. Avoid exposure to rain, humidity, or extreme temperatures.
Ensure the individual switch for that specific socket is flipped to the 'on' position and check that the master switch is enabled.
Confirm that your fixture uses a standard E27 base; if the socket is recessed, ensure the adapter base is fully tightened.
Check the diameter of your bulbs; they must be less than 80mm to clear one another when all four are installed.
To set up the adapter, ensure your primary light socket is powered off. Simply screw the Andoer base into your existing E27 socket, then insert your chosen bulbs into the four adapter ports. Verify that each bulb's diameter is 80mm or smaller to ensure they fit side-by-side without interference.
Care instructions include keeping the unit away from moisture to prevent electrical shorts and periodically wiping the plastic casing with a dry cloth to remove dust. Because this device handles significant electrical load, never exceed the 200W per-socket limit to avoid overheating.
