Best current price£9.11from eBay
Shopping.co.uk recommended and popular offers
eBay£9.11Visit shop Flat Twist Knot Wire Brush Deburring Rust Paint Removal 100mm Flat M14 Thread
Visit shop1 offer from £9.11
View price history by clicking the chart icon.
The AB Tools AT931 Flat Twist Knot Wire Brush is designed for professionals and serious DIYers who need to rapidly clean and prepare metal surfaces. Its key benefit is efficiently removing rust, paint, and preparing surfaces for welding or painting, leaving a pure metal finish. A caveat is the mandatory use of eye protection due to the nature of wire brush operation.
| Model Part Number | AT931 |
|---|---|
| Brand | AB Tools |
The maximum recommended speed for this wire brush is 1000rpm.
It is suitable for most metal surfaces requiring rust removal, paint stripping, deburring, or preparation for welding and painting.
No, this brush is specifically designed for metal surfaces and is too aggressive for wood or plastic, which it can damage.
Dispose of worn-out brushes according to local regulations for metal waste. Inspect for any remaining loose wires before disposal.
Always wear safety glasses or a full face shield, heavy-duty gloves, and hearing protection. Ensure good ventilation and keep bystanders clear of the work area.
The mounting type is an M14 x 2 threaded nut, compatible with most 4-1/2" and 9" angle grinders.
This listing is for a single (1) wire brush.
Verify that your angle grinder has an M14 x 2 thread. Ensure no debris is obstructing the threads on both the grinder spindle and the brush.
This can occur with excessive force or if the brush is worn. Reduce pressure, ensure you are operating within the 1000rpm limit, and inspect for damaged wires. Replace if shedding is significant.
Ensure consistent pressure and movement across the surface. The brush's rigid knots may require a slight angle adjustment depending on the surface contour.
Check that the brush is screwed on straight and securely. Ensure the grinder's spindle is not damaged. Always maintain a firm grip on the grinder.
Setup:
Compatibility:
This brush is designed for angle grinders with an M14 x 2 thread mounting. It is compatible with most 4-1/2" and 9" angle grinders that feature this standard thread size.
Care:
