Paint Stirrer Paddle Mixer - 400mm
Best current price£10.55from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£10.55Visit shop B&Q - 400mm Paint Stirrer Paddle Mixer For Mixing Paints Plasters Cement With Hex Head
Visit shopB&Q£10.55Visit shop All Offers
2 offers from £10.55
View price history by clicking the chart icon.
B&QB&Q - 400mm Paint Stirrer Paddle Mixer For Mixing Paints Plasters Cement With Hex Head
Free delivery in 1–3 days
£10.55
Visit shop
eBay400mm Paint Stirrer Paddle Mixer for Mixing Paints Plasters Cement with Hex Head
Free delivery in 1–3 days
£10.55
Visit shop
Product Information
Full details
The AB Tools 400mm Paint Stirrer Paddle Mixer is an essential tool for professional tradespeople and DIY enthusiasts who need to reliably mix plaster, mortar, cement, or heavy adhesives. Its primary benefit is the compact 80mm head design, which allows for thorough mixing in smaller buckets without causing messy over-spill. While highly durable due to its fully welded steel construction, it is important to note that it is designed for drills with a 3/8-inch chuck or larger, making it incompatible with some smaller, specialized cordless micro-drivers.
All features
| Model Part Number | DC053 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
Can I use this with a standard cordless screwdriver?
Only if your cordless drill has a 3/8-inch chuck or larger. Most small hex-bit screwdrivers cannot accommodate the shank size.
What is the maximum speed I should use?
The maximum recommended RPM for this stirrer is 900. Exceeding this may cause instability.
Is it safe to use for food-grade mixing?
No, this tool is intended for construction materials like plaster, cement, and adhesives and features a zinc coating not rated for food contact.
Will this rust if I leave it in water?
It is coated with gold zinc for corrosion resistance, but it should be cleaned and dried promptly to maximize its lifespan.
What size bucket is best for this paddle?
It works best in smaller buckets (1-5 gallons) due to its 80mm head size.
Troubleshooting
The paddle slips inside the drill chuck
Ensure the hexagonal shaft is fully seated and the chuck is tightened properly. If slipping persists, check that the chuck jaws are not worn.
Excessive vibration during use
Check that the paddle is not bent and ensure it is centered correctly in the drill chuck. Ensure the material container is stable.
Material is splattering out of the bucket
Reduce the drill speed (do not exceed 900 RPM) and ensure the paddle head is fully submerged before increasing power.
Pros and Cons
Pros
- Compact size prevents mess in small buckets
- Durable fully welded steel construction
- Compatible with most standard drills
- Corrosion-resistant gold zinc finish
Cons
- Not suitable for drills with chucks smaller than 3/8 inch
- Maximum RPM limit of 900 may be restrictive for some high-speed liquid applications
- Manual handling required to prevent fatigue on very large batches
Setup, Compatibility & Care
To set up the mixer, simply insert the hexagonal shaft into the drill chuck and tighten firmly to ensure no slippage occurs under load. The tool is compatible with all standard electric, pneumatic, and cordless drills that accept a 3/8-inch chuck or larger. For care and maintenance, it is critical to clean the paddle immediately after use. If mixing cement or plaster, ensure all residue is washed away with water before it hardens; once the material dries, it can be difficult to remove without damaging the zinc coating. Periodically inspect the weld points for any signs of fatigue if the tool is used daily for heavy-duty mortar mixing.