Best current price£58.50from eBay
Shopping.co.uk recommended and popular offers
eBay£58.50Visit shop New Manrose Remote 12 Volt Transformers Type T12T Timer model inc VAT
Visit shop3 offers from £58.50 - £68.30
View price history by clicking the chart icon.
The Manrose T12HP is a remote humidistat transformer designed for 12V low voltage extractor fans, specifically those installed in shower or bath splash areas. It offers crucial safety by powering fans remotely, allowing control via an integrated pull cord or humidity sensor. A key benefit is its flexibility in mounting location, such as in a loft or high on the ceiling, away from direct water exposure. The primary caveat is its reliance on a compatible 12V SELV Manrose extractor fan.
| Model Part Number | T12HP |
|---|---|
| Brand | Manrose |
SELV stands for Safety Extra Low Voltage. It means the voltage is kept at a very low level (12V in this case) and isolated from the mains supply, making it safe for use in areas where water is present, like showers and baths.
No, this transformer is specifically designed for use with 12V SELV Manrose low voltage extractor fans. You must confirm your fan's voltage and power requirements match the T12HP's output (12V AC 50Hz 25VA).
The T12HP can be mounted in a loft space or high on a ceiling, away from direct water splash, ensuring its longevity and safety.
The humidity level is adjusted using the adjuster knobs located on the transformer unit. Refer to the product manual for precise adjustment ranges (typically 40-95% RH).
The integral timer allows the fan to continue running for a set period (adjustable between 1 and 20 minutes) after the humidity level has dropped below the set point, ensuring adequate drying of the room.
No, the Manrose T12HP is a remote humidistat transformer and pull cord unit. It requires a separate compatible 12V SELV Manrose extractor fan.
The unit has dimensions of Height: 82mm, Length: 145mm, and Depth: 65mm. It is fitted on a standard 25mm deep double pattress.
Check that the humidistat is set to a level below the current room humidity. Ensure the 12V fan is correctly connected and powered. Verify the mains power supply to the transformer is active.
Ensure the pull cord is correctly connected to the override switch. Check the mains power supply to the transformer and the connection to the 12V fan.
The humidistat may be set too high or the room humidity is consistently above the set point. Check the humidistat setting. Ensure the timer is not set to its maximum duration if the fan is still running after that period.
Check the mains power supply to the transformer. If power is present, the neon indicator itself may be faulty or the transformer may have failed.
Setup: This unit is designed to be wired between the mains power supply and a compatible 12V SELV Manrose extractor fan. It should be installed by a qualified electrician. The transformer can be mounted in a loft space or high on a ceiling, typically alongside a pull cord light switch. Ensure all connections are secure and comply with local electrical regulations. The unit comes complete with a standard 25mm deep double pattress for mounting.
Compatibility: The Manrose T12HP is specifically designed for use with 12V SELV Manrose low voltage extractor fans. It outputs 12V AC 50Hz at 25VA. Always verify that your extractor fan is compatible with these specifications before installation.
Care: The casing is made from impact-resistant, high gloss ABS thermoplastic, making it durable and easy to clean. Disconnect power before cleaning. Wipe the exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
