Time White Twin & Earth Cable 1.5mm² X 50M - White

BASEC approved low smoke zero halogen 3 Core & Earth domestic wiring cable. Can be installed in fi...

Best current price£41.00from B&Q

One Offer

1 offer from £41.00

View price history by clicking the chart icon.

B&QB&Q - White Twin & Earth Cable 1.5mm² X 50M
Free delivery in 1–3 days
£41.00
Visit shop

Product Information

Full details

This Time White Twin & Earth Cable is designed for electricians and homeowners undertaking fixed installations in dry or damp premises. Its key benefit is providing a low smoke zero halogen (LSZH) solution for environments where fire safety is paramount. A potential caveat is that it requires mechanical protection when laid in conduit or trunking. This 1.5mm² cable is BASEC approved and suitable for surface clipping, tray mounting, or free air installations where mechanical damage is unlikely.

All features

ColourWhite
BrandTime

Extended Product Information

FAQs

What does 'Low Smoke Zero Halogen' (LSZH) mean?

LSZH means that when the cable is exposed to fire, it produces very little smoke and does not emit toxic halogenated gases (like hydrochloric acid or bromine), which are dangerous to health and corrosive to equipment.

Is this cable suitable for outdoor use?

This cable is designed for fixed installations in dry or damp premises. It is not specifically rated for direct burial or prolonged exposure to UV and harsh weather conditions without additional protection.

Can I use this cable for burying in walls?

Yes, it is suitable for fixed installations, including within walls, provided it is installed according to relevant electrical regulations and receives adequate protection, especially where mechanical damage could occur.

What is the maximum current this 1.5mm² cable can safely carry?

The maximum current carrying capacity depends on the installation method (clipped direct, in conduit, etc.) and ambient temperature. For typical domestic installations, it's generally used for lighting circuits or socket outlets with lighter loads. Always refer to BS 7671 (IET Wiring Regulations) or consult a qualified electrician for precise load calculations.

Does this cable require a separate earth wire?

Yes, this is a 3 Core & Earth cable, meaning it includes a dedicated earth conductor for safety, essential for most modern domestic circuits.

Can this cable be used with standard UK sockets and switches?

Yes, this cable is designed for standard UK domestic wiring and is compatible with most common sockets, switches, and accessories.

Troubleshooting

Cable is stiff and difficult to bend into position.

Allow the cable to warm up to room temperature for easier handling. Avoid forcing sharp bends, which can damage the insulation.

Outer sheath appears damaged during installation.

Do not use the damaged section. Cut back to a point where the sheath is intact. If the damage is significant, consider replacing the entire length.

Intermittent power supply to connected devices.

Check all connections at both ends of the cable run for security and correctness. Ensure there are no breaks or pinches in the cable.

Pros and Cons

Pros

  • Enhanced fire safety due to LSZH properties
  • Meets BASEC approval for reliability
  • Suitable for a variety of fixed installation methods
  • Provides a complete circuit solution with 3 cores and earth

Cons

  • Requires additional mechanical protection if installed in conduit or trunking
  • Not suitable for situations with potential for significant mechanical damage without protection
  • Specific use case for fixed installations; not for flexible applications

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the power supply is completely isolated before commencing any electrical work.
  2. Strip the outer sheath carefully to reveal the insulated cores and earth wire.
  3. Terminate the conductors into appropriate junction boxes, sockets, or switches using compatible connectors.
  4. Ensure all connections are secure and correctly made according to electrical regulations.
  5. If installing in conduit or trunking, ensure it provides adequate mechanical protection.

Compatibility:

  • This cable is designed for fixed electrical installations within domestic and similar environments.
  • It is compatible with standard UK wiring accessories, junction boxes, and consumer units.
  • Ensure the cable's current-carrying capacity is suitable for the intended circuit load. Consult an electrician if unsure.

Care:

  • Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid sharp bends or kinks during installation, as this can damage the insulation and sheath.
  • Regularly inspect visible sections of the cable for any signs of damage, particularly in areas prone to wear and tear.

Price History

DatePrice
Visit shop