Best current price£62.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£62.99Visit shop B&Q - Untreated Tongue And Groove Matchboard Cladding (T) 9mm (W) 95mm (L) 2.4MPack Of 10
Visit shop1 offer from £62.99
View price history by clicking the chart icon.
The Snowdon Timber Untreated Tongue and Groove Matchboard Cladding is designed for DIY enthusiasts and interior renovators looking to add traditional, warm aesthetics to their home. Its primary benefit lies in the simple tongue and groove interlocking system that makes covering walls or ceilings straightforward, though users must note that the boards arrive completely untreated and require a finish such as varnish or paint before they can be considered protected or finalized in a living space.
| Model Part Number | 9 x 95 x 2400mm |
|---|---|
| Brand | Snowdon Timber |
While suitable for interiors, they are not naturally moisture-resistant. If used in high-humidity areas, you must apply a high-quality, bathroom-grade sealant or wood varnish to all sides, including the edges.
Yes, a light sanding with fine-grit sandpaper is recommended to remove any rough patches and ensure better adhesion for paint or primer.
For a professional finish, use panel pins driven into the 'tongue' part of the board, allowing the next board to cover the nail head.
It is best practice to install a wooden batten framework onto the brick wall first, then fix the cladding to the battens.
Calculate the total square meterage of your wall or ceiling and divide by the coverage area of a single board (width multiplied by length), adding 10% for cutting waste.
Ensure that the tongue is fully seated into the groove before fixing; check that the base board is level.
Lightly sand the timber before applying the finish to ensure uniform absorption and use a wood primer if painting.
Ensure the boards are stored flat and dry before installation and that they have been acclimated to the room humidity.
Before installation, ensure the timber is acclimated to the room temperature for 24 to 48 hours to minimize expansion or contraction. Use a spirit level to ensure the first board is perfectly horizontal or vertical to maintain alignment across the surface. Secure the boards using small panel pins or a nail gun into the tongue for a hidden fixing effect. Because these boards are supplied untreated, it is vital to apply your chosen wood treatment—such as varnish, oil, or wood dye—within a short time of installation to prevent moisture absorption or surface discoloration. For ongoing care, dust the surfaces with a dry cloth; if you have applied a durable varnish, a damp cloth can be used for occasional cleaning.
Clear Grade Maritime Pine Tongue and Groove Cladding - 10mm x 90mm x 2.0m - Pack of 10From £90
Snowdon Timber Scaffold Board - 8 Pack - CreamFrom £146
Snowdon Timber Furniture Board - 18mm x 300mm x 850mm - Pack of 1From £24
Snowdon Timber Factory Reject Unbanded Scaffold Board - 975mm x 225mm x 36mmFrom £42
Snowdon Timber Treated Gravel Board - 22mm x 150mm x 3.6mFrom £42
Snowdon Timber Oak Furniture Board - 18mm x 200mm x 800mmFrom £49
Snowdon Timber Untreated Shiplap Cladding - 12mm x 120mm x 2.4M - 10 PackFrom £83
Blueprint Joinery Stair Cladding Oak Tread Extension Board - 1000mm x 235mmFrom £42
Snowdon Timber Oak Furniture Board - 18mm x 200mm x 1200mmFrom £53
Angle Profile - BrownFrom £10
Medium Density Fibreboard Panel - Arrangate - Mdf10From £19
Smooth Planed Stripwood - (L)2.4M (W)44mm (T)12mm - B&QFrom £10