Jenolite Universal Etch Primer - Grey

The Jenolite Universal Etch Primer is suitable for use on aluminium, galvanised steel, stainless steel, wood, and plastic.

Generally, one coat is sufficient. However, for porous surfaces or to achieve a more uniform finish, you may apply a second thin coat after the first has dried.

Yes, it can be used on plastic, but always test on a small, inconspicuous area first to ensure compatibility.

You can use a wide range of topcoats, including acrylic and enamel paints. Always check the topcoat manufacturer's recommendations for compatibility with etch primers.

Drying times vary depending on temperature and humidity. Refer to the product label for specific drying times, but usually, it is fast drying.

Clean the surface to remove dirt, grease, rust, and loose paint. Lightly sand the surface to create a key for the primer to adhere to.

If the nozzle clogs, clean it with a solvent-based cleaner or replace it with a new nozzle.

Ensure the surface is properly cleaned, degreased, and lightly sanded before application. If using on a previously painted surface, ensure all loose paint is removed.

Apply the primer in thin, even coats. Avoid applying too much primer in one go. Keep the spray nozzle at the correct distance from the surface.

Make sure the ambient temperature and humidity are within the recommended range. Ensure adequate ventilation. Allow sufficient drying time between coats.

Ensure the primer is fully cured before applying the topcoat. Use a topcoat that is compatible with the primer.