2/2.5ml BBraun Omnifix Luer Lock Syringes - B. Braun

Yes, each syringe is sterile and individually wrapped to maintain sterility until the packaging is opened.

A three-piece syringe consists of the barrel, the plunger, and a rubber seal on the end of the plunger, which ensures a tight seal for precise aspiration and dispensing.

No, the B. Braun Omnifix Luer Lock Syringes are designed for single use only and must be disposed of properly after each use to prevent infection and ensure sterility.

A Luer Lock is a standardized system for connecting medical devices. It features a threaded collar that twists onto a corresponding fitting, providing a secure, leak-proof connection.

Being Latex-Free is crucial for patients who have allergies to natural rubber latex, preventing potential allergic reactions and ensuring safer patient care.

Hold the syringe vertically, ensure the plunger is fully seated at the zero mark, and carefully draw up the medication. Read the volume at eye level, aligning the bottom of the black rubber seal with the desired marking on the ultra-clear barrel.

The integrated plunger stop is designed to prevent the plunger from being accidentally pulled out of the barrel, which helps to ensure complete and controlled delivery of the contents.

Ensure the protective cap is fully removed and that the plunger seal is intact. Check for any external obstructions. If the issue persists, discard the syringe as it may be defective.

Ensure the needle or device is securely Luer Locked onto the syringe tip. Verify that the connection is properly seated and tightened without over-tightening, which can sometimes damage the threads.

Check that the needle is fully submerged in the fluid and that the needle is not blocked. Ensure the plunger is being pulled smoothly and that there are no air leaks in the system.

Ensure the syringe is held vertically when reading the markings. Confirm that the bottom of the plunger's rubber seal is aligned precisely with the desired volume line on the ultra-clear barrel.