StarTech.com 2.5m White Slim CAT6 Ethernet Cable - Cat6

The main advantage is its significantly smaller diameter (3.6mm vs. standard ~6mm), which provides greater flexibility, improves airflow in crowded racks, and makes routing easier in tight spaces.

Yes, this cable specifically supports PoE++ (up to 100W) as it is designed with 28AWG pure bare copper wire and complies with IEEE 802.3bt Type 4 specifications.

LSZH stands for Low Smoke Zero Halogen. This means the cable jacket is designed to emit very little smoke and no toxic halogens when exposed to high heat or fire, making it safer for use in enclosed or poorly ventilated areas.

This is an Unshielded Twisted Pair (UTP) cable. While it offers better flexibility and cost-effectiveness, it may be more susceptible to electromagnetic interference (EMI) in environments with high levels of electrical noise.

This Cat6 cable supports data transfer rates up to 1000 Mbps (1 Gbps) and operates at frequencies up to 250 MHz.

Yes, the cable features snagless RJ45 connectors. These have a boot design that protects the release tab, preventing it from snagging or breaking during installation and removal.

Please refer to the manufacturer's official documentation or product page for the most up-to-date warranty information. StarTech.com typically offers a strong warranty on their networking accessories.

Yes, Cat6 cables are backward compatible with Cat5e and Cat5 devices, though the maximum network speed will be limited by the capabilities of the slowest device in the connection.

Verify that both ends of the cable are securely plugged into the correct ports on your network devices. Check for physical damage to the cable or connectors. Test with a different known-good cable to rule out the cable as the issue. Ensure the device on the other end is powered on and configured correctly.

Confirm that the connected devices support Gigabit Ethernet speeds. Check the cable's specifications; ensure it's not being used for a purpose beyond its rated frequency (250 MHz) or bandwidth. Inspect the cable for any signs of damage, kinks, or crushing that could affect signal integrity. Ensure the cable is not excessively long for the required throughput.

Ensure the power sourcing equipment (PSE) supports PoE++ (IEEE 802.3bt Type 4) and can deliver up to 100W. Verify that the connected device (PD) is also PoE++ compliant and does not exceed the power budget. Check that the cable is functioning correctly; damaged cables can impede power delivery. Try a shorter, known-good cable if possible to test power delivery.

While this cable is slimmer and more flexible than standard Cat6, avoid bending it tighter than its minimum bend radius (typically 4 times the cable diameter for UTP). Use gentle curves when routing. If routing in extremely tight spaces, consider alternative cable management strategies or shorter cable lengths if feasible.