Best current price£0.98from Scan Computers
Shopping.co.uk recommended and popular offers
Scan Computers£0.98Visit shop Cables Direct Xclio Cat6 Snagless Moulded Gigabit Ethernet Cable Rj45 0.25M Black Ert-600-Hk
Visit shop
B&Q£4.80Visit shop B&Q - Ethernet Network Cable Cat6 Gigabit Rj45 Copper Internet Patch Lead White 0.25M
Visit shop56 offers from £0.98 - £14.08
View price history by clicking the chart icon.
This 0.25m red Cat6 patch cable from Cables Direct is designed for reliable Gigabit Ethernet connections in home or office networks. It offers superior performance over older standards due to enhanced crosstalk specifications, ensuring stable data transfer up to 1000 Mbit/s. While it provides excellent connectivity for short-range needs, its limited length may require longer cables for more extensive setups.
| Series | Cat6 |
|---|---|
| Model Part Number | ERT-600-HR |
| Brand | Cables Direct |
Cat6 cables offer better performance than Cat5e, supporting higher frequencies (250 MHz vs 100 MHz) and significantly reduced crosstalk, which allows for faster and more reliable Gigabit Ethernet connections.
No, this cable is only 0.25 meters (approximately 0.82 feet) long and is best suited for connecting devices that are very close to each other. For longer distances, you will need a longer Cat6 cable.
This cable is U/UTP (Unshielded Twisted Pair), meaning it does not have an external shield. It is suitable for most home and office environments but may not be ideal for areas with high electromagnetic interference.
1000 Mbit/s, also known as 1 Gigabit per second (Gbps), is the maximum data transfer speed supported by this Cat6 cable for Gigabit Ethernet networks.
Yes, Cat6 cables are backward compatible. They will work with devices designed for Cat5e, Cat-5, and Cat-3 standards, although the connection speed will be limited by the capabilities of the older device.
Simply plug one RJ-45 connector into the Ethernet port of your first device (e.g., router) and the other RJ-45 connector into the Ethernet port of your second device (e.g., computer or TV). It's a plug-and-play connection.
Ensure both ends of the cable are securely plugged into the correct ports. Try a different Ethernet port on your router or switch. Test with a different Cat6 cable or port to rule out a cable fault. Verify network settings on your devices.
Visually inspect the cable jacket and connectors for any tears, kinks, or bent pins. If damage is found, the cable should be replaced immediately to ensure network integrity and safety.
Check for potential interference from other electronic devices or power cables nearby, especially if the cable is not shielded. Ensure the cable is not bent at a sharp angle or under tension. Try connecting the devices with a shorter or longer cable to test if length is a factor.
Setup:
Compatibility:
Care:
