Best current price£2.95from Amazon
Shopping.co.uk recommended and popular offers
Amazon£2.95Visit shop Blum Silver Clip Mounting Plate, 0Mm, Zinc, Ha: Cam 175H5400
Visit shop
eBay£2.95Visit shop 5H540 Blum Mounting Plate 175H5400 Clip, Straight, 0 mm, Zinc, screw-on
Visit shop3 offers from £2.95
View price history by clicking the chart icon.
The Blum Mounting Plate 175H5400 is an essential hardware component for cabinet makers and DIY enthusiasts looking to achieve professional-grade cabinet door installation and alignment. This straight-shaped, nickel-plated zinc mounting plate offers exceptional durability and simplifies the installation process with its integrated adjustment cam, though users should ensure they have the correct chipboard screws and drilling pattern before starting their project.
| Colour | Silver |
|---|---|
| Model Part Number | 175H5400 |
| Brand | Blum |
No, standard chipboard screws for mounting are typically sold separately.
This mounting plate is specifically engineered for Blum hinges and may not provide a secure or aligned fit for other brands.
It is made from durable zinc with a professional-grade nickel-plated finish.
The 175H5400 is a straight-shaped mounting plate.
Use the integrated adjustment cam located on the plate; turning it with a screwdriver will move the door vertically.
Check if the adjustment cam has reached its physical limit. Re-center the cam and verify if the mounting plate itself was installed at the correct vertical height on the cabinet wall.
Ensure that the chipboard screws are fully tightened and that the pilot holes are not over-drilled, which can strip the wood fibers.
For optimal setup, ensure your cabinet side panels are perfectly plumb. Use the recommended chipboard screws to secure the plate to the cabinet wall, ensuring the plate sits flush against the surface. The 175H5400 is compatible with standard Blum hinges, but always verify the hinge series (e.g., CLIP or CLIP top) matches the mounting plate system. For care, avoid using abrasive chemical cleaners that might strip the nickel plating; simply wipe the surface with a dry or slightly damp microfibre cloth to remove dust or debris.
