Best current price£18.46from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£18.46Visit shop Liberon White 126950 Floor Sealer 1 Litre
Visit shop
The Range£24.59Visit shop Liberon Floor Sealer 1 Litre - Oil-Based Finish - 126835 - Clear
Visit shop10 offers from £18.46 - £79.99
View price history by clicking the chart icon.
The Liberon Floor Sealer is designed for interior wooden floors and unvarnished cork surfaces, offering a natural, oil-based finish that protects against stains and scratches. It's ideal for preparing floors before waxing or varnishing, providing resistance to water, heat, and alcohol. While it enhances the natural wood color and can be used as a final finish, its oil-based nature requires specific cleaning agents and a longer drying time.
| Model Part Number | 126951 |
|---|---|
| Brand | Liberon |
The coverage is approximately 8-10 square meters per litre, depending on the porosity and condition of the wood surface.
No, Liberon Floor Sealer is specifically designed for interior use only.
While floors are dry to touch after 5 hours, full cure can take longer. Avoid heavy traffic and placing furniture for at least 24-48 hours, and consult product packaging for specific recommendations.
Yes, it can be used alone to achieve a final satin to gloss finish, providing protection and enhancing the wood's natural color.
Tools and brushes should be cleaned immediately after use with white spirit.
No, this sealer is intended for raw or unvarnished wood and cork surfaces. Previously varnished floors should be prepared by sanding back to bare wood or a compatible sealer should be used.
When stored in its original, unopened container in a cool, dry place, it typically has a shelf life of several years. Refer to the product container for any specific expiry information.
Ensure the sealer is applied in thin, even coats. Stir the product well before and during use. Check for any airborne dust or particles that may have settled during drying.
Verify that the room temperature is adequate and ventilation is good. Ensure no incompatible products were applied previously. Check for excessive application thickness.
Apply a second coat as the first coat may have been absorbed unevenly. Ensure the wood surface is properly prepared and free of old finishes or treatments.
This usually indicates an insufficient drying time between coats or too thick an application. Allow more time for the surface to cure, or if severe, a light sanding may be required followed by a reapplication.
Setup: Ensure the wooden floor or cork surface is clean, dry, and free from dust, grease, and old finishes. Stir the Liberon Floor Sealer thoroughly before application. Apply using a good quality brush or a clean, lint-free cloth in thin, even coats along the grain of the wood. Allow a minimum of 5 hours drying time between coats.
Compatibility: Suitable for interior wooden floors and unvarnished cork surfaces. It is designed to seal floors prior to waxing and varnishing.
Care: Tools and brushes should be cleaned immediately after use with white spirit. For maintaining sealed floors, use appropriate wood floor cleaners that are compatible with oil-based finishes. Avoid abrasive cleaners or excessive water.
