Bristan Acute Thermostatic Exposed Mixer Shower Kit - SHXAR

The Bristan Acute mixer shower requires a minimum of 0.5 bar water pressure for optimal performance.

No, this is a mixer shower and requires a hot and cold water supply from your home's plumbing system. It is not compatible with electric showers.

Gently rub the rubber nozzles with your finger or a soft cloth. For tougher limescale, you can remove the handset and soak it in a mild descaling solution like diluted white vinegar.

The Bristan Acute mixer shower kit comes with a 5-year parts and 1-year labour guarantee.

Yes, the thermostatic cartridge has a preset temperature stop at 41°C for safety. This can be adjusted by a qualified installer if a higher temperature is desired, but it is recommended to keep it at or below 41°C for safe showering.

Yes, the kit includes a single-function, rub-clean anti-limescale handset.

Check that the hot and cold water supplies are correctly connected to the valve. Ensure your water system is providing adequate hot water and that the incoming temperatures are within expected ranges. If the issue persists, consult a qualified plumber.

Clean the rub-clean nozzles on the handset by gently rubbing them to dislodge limescale. Check the shower hose for kinks or blockages. Ensure the filters within the valve inlets are clear of debris.

The valve may have accumulated debris. Isolate the water supply, remove the valve cover, and carefully clean the internal components. If the problem continues, the internal cartridges may need replacing.

This could indicate low water pressure or debris in the system. Ensure your water pressure meets the minimum requirement (0.5 bar). Flush the system again to remove any potential blockages within the pipework or valve.