Best current price£30.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£30.00Visit shop B&Q - Horizontal Plate Lifting Clamp 0.75 Ton (0-25mm Grip Sheet Non Slip 750Kg)
Visit shop3 offers from £30.00
View price history by clicking the chart icon.
This 0.75 Ton Horizontal Plate Lifting Clamp is designed for professionals who need to securely lift sheet materials horizontally. Its primary benefit is providing a safe and non-slip grip for materials up to 25mm thick. A key consideration is the minimum steel thickness requirement of 5mm and a minimum loading of 150KG. This clamp conforms to BS EN 13155 specifications and offers a lifting capacity of 0.75 tons.
| Model Part Number | SFHLC0.75 |
|---|---|
| Brand | SecureFix Direct |
The maximum working load limit (SWL) for this clamp is 0.75 Ton (750 kg).
The clamp requires a minimum steel thickness of 5mm. The jaw opening ranges from 0mm to 25mm.
No, this clamp is specifically designed for lifting sheet materials in a horizontal position only.
This is the minimum weight the clamp needs to be subjected to for it to engage and grip the material effectively and safely. The minimum load should be at least 20% of the SWL.
Yes, a test certificate is included and will be sent via email. This confirms the clamp meets BS EN 13155 specifications.
Keep the clamp clean, inspect jaws for wear, store in a dry place, and lubricate moving parts if necessary. Avoid exceeding the SWL and ensure correct material thickness and loading are met.
Attempting to lift a load below the minimum specified loading may result in insufficient grip and potential slippage, which is a safety hazard. Always ensure the load meets or exceeds 150KG.
Ensure the material thickness is within the 0-25mm range and meets the minimum 5mm steel thickness requirement. Verify the minimum loading of 150KG is achieved. Check jaws for obstructions or wear. Ensure the clamp is positioned correctly on the material edge.
Inspect the clamp mechanism for dirt, debris, or damage. Clean any obstructions. If the mechanism is stiff, lubrication may be required. Do not force the clamp if there is significant resistance.
Immediately remove the clamp from service. Do not use if there are visible signs of cracks, bends, or excessive wear on the jaws or body. Contact the supplier for a replacement or inspection.
Check your email inbox, including spam or junk folders. Contact customer support with your order details to request the certificate be resent.
Setup:
Compatibility:
Care:
