Einhell Polishing and Sanding Set - 180mm

This set is suitable for polishing and finishing various surfaces including car paint, metal, plastics, and wood. The appropriate grit of sanding disc or type of polishing pad should be selected based on the material and the desired finish.

Lower grits (like 60) are for coarse material removal and shaping. Medium grits (like 80) are for general sanding and smoothing. Higher grits (like 120) are for fine finishing before polishing or painting.

This set is designed for specific Einhell models. While the 180mm size and hook-and-loop system might physically fit some other machines, compatibility is only guaranteed with the listed Einhell models. Using with incompatible machines may lead to poor results or damage.

The lifespan of the accessories depends heavily on the application, the material being worked on, and the amount of pressure applied. They are consumable items and will need to be replaced when worn out or no longer effective.

The synthetic polishing caps are generally used for applying polishing compounds and buffing. The foam attachment can be used for applying waxes, sealants, or for lighter polishing tasks, offering a slightly different finish depending on the foam density and compound used.

Replacement accessories compatible with the 180mm hook-and-loop system are generally available. It is recommended to use accessories designed for this size and fastening type.

Ensure the hook-and-loop surfaces on both the machine pad and the accessory are clean and free from debris. Verify that the accessory is centered correctly.

Check that the accessory is properly seated and that consistent, even pressure is applied during use. Ensure the correct grit or pad is being used for the specific task.

Periodically clean the accessory and the machine's pad holder during use. Ensure proper ventilation and consider using a dust collection system if available.