B2c Layflat Hose Coupling Fitting - Type E - (Cam To Serrated Hose Tail), 2"

All thread sizes on this fitting are BSP - British Standard Pipe Thread.

Type E indicates that this fitting has a cam lock on one end and a serrated hose tail on the other, designed to connect directly to a hose.

No, a hose clamp is not included with this fitting. It must be purchased separately to secure the hose to the serrated tail.

The fitting is made of durable polypropylene, which offers good resistance to many common chemicals.

This fitting is designed for layflat hoses and general water transfer. It is not intended for extremely high-pressure systems or steam applications. Always refer to the pressure ratings of your hose and clamping system.

Ensure the serrated tail fits snugly inside the hose. Use a high-quality hose clamp of the appropriate size and tighten it firmly around the hose and the fitting's serrated tail.

Ensure the mating camlock faces are clean and free of debris. Check for any damage to the cam arms or locking grooves. Ensure the correct size fitting is being used.

The hose may be too large for the fitting, or the hose clamp is not tightened sufficiently. Use a properly sized hose clamp and tighten it securely around the hose and the serrated tail.

Inspect the gasket/seal on the mating camlock for damage or wear and replace if necessary. Ensure the cam arms are fully engaged and locked down.

Polypropylene can become brittle in very cold temperatures. Avoid applying excessive force in freezing conditions. Store the fitting indoors during prolonged cold weather.