Cobra Chainsaw - 40V

The Cobra 40V Chainsaw comes with a 2-year warranty.

No, this chainsaw is designed to work exclusively with Cobra 40V MAX+ Lithium Ion batteries and chargers for optimal performance and safety.

Battery life depends on the task, wood density, and chain sharpness. For typical pruning, a 4.0Ah battery can provide a moderate amount of runtime. It is recommended to have a spare charged battery for extended use.

Brushless motors are low-maintenance. The primary care involves keeping the air vents clear of dust and debris and ensuring the unit is clean overall.

The 35cm (14") bar length and overall power are best suited for domestic tasks like pruning and cutting smaller logs. It is not designed for felling large trees.

The chainsaw features a tool-free chain adjuster. Usually, a knob or lever on the side of the saw allows you to tighten or loosen the chain. Ensure the chain is slightly loose by hand but does not sag off the bar.

First, ensure the oil reservoir is filled with appropriate bar and chain oil. Check that the oiler hole on the bar is not blocked. If the issue persists, consult the user manual for specific cleaning instructions for the oil pump.

Ensure the battery is fully charged and properly inserted. Check that the safety brake is disengaged. Verify the on/off switch is in the correct position.

Adjust the chain tension using the tool-free adjuster. Ensure the chain is properly lubricated. Check if the chain is dull and requires sharpening.

The chain may be too tight, overheated, or the battery may be low on power. Allow the saw to cool, check chain tension, and ensure the battery is sufficiently charged.

Check chain tension and ensure the chain is properly seated on the bar. A dull or damaged chain can also cause vibration.

Check the oil reservoir level and refill if necessary. Ensure the oiler hole on the bar is clear of debris. Clean the oil pump mechanism if issues persist.