Best current price£299.89from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£299.89Visit shop VOLTCRAFT DPPS-32-15 Bench Mount PSU 1-32 VDC 15A 480W
Visit shop8 offers from £299.89 - £389.96
View price history by clicking the chart icon.
The VOLTCRAFT DPPS-60-8 is a versatile benchtop power supply unit designed for professionals and hobbyists needing a stable DC voltage source for low-voltage applications. Its key benefit is precise, adjustable voltage and current control with convenient front and rear outputs. A potential caveat is the 5A limit on the front output, requiring use of the rear for higher current demands.
| Model Part Number | DPPS-60-8 |
|---|---|
| Brand | VOLTCRAFT |
The front panel 4mm safety sockets are limited to a maximum output of 5A.
No, this is a DC power supply that provides positive DC voltage output only.
Set your desired voltage and current, then press and hold one of the memory slot buttons (usually indicated by M1, M2, M3) until it saves. To recall a setting, briefly press the desired memory slot button.
Constant power operation allows you to pre-set a maximum power output (Watts). The unit will then adjust voltage and current to maintain that power level, preventing overload and ensuring stable operation for certain loads.
Please refer to the product manual or the retailer's warranty information for the specific warranty period, as it can vary.
Yes, provided the automotive components are designed for the DC voltage range (1-60V) and current capacity (up to 8A) of the power supply. Always confirm the specific requirements of the automotive electronics.
Ensure the power cord is securely connected to both the unit and a functioning wall outlet. Check the main power switch on the rear of the unit is in the 'on' position.
Verify that the desired voltage/current is within the unit's range (1-60V, up to 8A). Ensure the coarse and fine adjustment knobs are set correctly. Check if an overload protection has been triggered on the front output.
Contact customer support. This may indicate a hardware issue with the LCD display or internal components.
Ensure all ventilation slots are clear of obstructions. Reduce the load current if operating near the maximum rating for extended periods. Allow the unit to cool down if it has shut off due to thermal protection.
Setup: Connect the power supply to a suitable mains outlet using the provided power cord. Ensure the power switch is in the 'off' position before connecting any loads. Connect your device or circuit to either the 4mm safety sockets on the front panel or the high-current screw connectors on the rear panel, observing polarity.
Compatibility: This power supply is designed to operate standard low-voltage DC electronic devices and components. It is compatible with most electronics requiring voltages between 1-60V DC and current up to 8A. Always verify the voltage and current requirements of your device before connecting.
Care: Keep the unit clean and free of dust. Use a dry or slightly damp cloth for cleaning; avoid solvents or abrasive cleaners. Ensure ventilation slots are unobstructed to prevent overheating. Regularly check the power cord and connectors for any signs of damage.
