Litecraft Terra Drive Over Light - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Litecraft Terra Drive Over Light in Black is designed for homeowners seeking to enhance driveway or path visibility with a durable, ground-flush lighting solution. Its key benefit is providing bright, reliable guidance at night while maintaining a discreet appearance during the day. A caveat to note is that the bulb is sold separately. This recessed light offers excellent durability, weather resistance, and a sleek black finish to complement outdoor spaces.
All features
| Colour | Black |
|---|---|
| Brand | LITECRAFT |
Extended Product Information
FAQs
Is the bulb included with the Litecraft Terra Drive Over Light?
No, the bulb is not included. You will need to purchase a GU10 bulb separately, with a maximum wattage of 7 Watts.
What is the IP rating of this light?
The Litecraft Terra Drive Over Light has an IP67 rating, which means it is protected against dust ingress and can withstand immersion in water up to 1 meter deep for 30 minutes.
Can this light be driven over by vehicles?
Yes, the Terra Drive Over Light is designed to withstand vehicle weight, supporting up to 200kg per square cm.
What are the dimensions for installation?
The light has a diameter of 10 cm, a cut-out diameter of 9 cm, and requires a recessed depth of 11.5 cm.
What material is the light made from?
The light is constructed from metal and plastic.
How do I clean the light?
Clean the light with a soft, damp cloth. Avoid using harsh or abrasive cleaning agents.
Does this light require professional installation?
While the fixture itself can be placed into a prepared hole, the electrical wiring aspect typically requires a qualified electrician to ensure safe and compliant installation.
Troubleshooting
Light does not turn on
Ensure the power supply is connected and switched on. Verify that the GU10 bulb is correctly installed and not burnt out. Check the wiring connections for any loose or damaged wires; consult an electrician if unsure.
Flickering light
This could be due to a loose bulb connection or an issue with the bulb itself. Try reseating the bulb or replacing it with a new, compatible GU10 bulb. Check wiring for intermittent faults.
Light is not weather-resistant
Confirm the IP67 rating is intact and that the fixture is properly sealed. Ensure any protective covers or seals are correctly in place. If the fixture shows signs of damage, it may need replacement.
Surface around the light is damaged
This is likely due to improper installation or exceeding the weight limit. Ensure the light is installed in a suitable surface and that vehicle weight does not exceed the specified limit. Repair the surrounding surface as needed.
Pros and Cons
Pros
- Robust construction suitable for driveways.
- Weather-resistant with an IP67 rating.
- Sleek, discreet design that complements outdoor aesthetics.
- Provides excellent directional lighting for safety and ambiance.
- Easy to integrate into paved surfaces.
Cons
- Bulb is not included and must be purchased separately.
- Requires electrical wiring and professional installation for optimal safety and function.
- Limited to a maximum bulb wattage of 7W.
- Cut-out diameter specification is critical for installation.
Setup, Compatibility & Care
Setup:
- Preparation: Determine the placement and mark the required cut-out diameter of 9 cm.
- Installation Hole: Cut a hole in the driveway or path material suitable for the 9 cm cut-out diameter and a recessed depth of 11.5 cm.
- Wiring: Connect the appropriate electrical wiring to the light fitting. This step typically requires a qualified electrician to ensure safety and compliance with local building codes.
- Placement: Insert the light fitting into the prepared hole, ensuring it sits flush with the surface.
- Bulb Installation: Install a GU10 bulb (maximum 7 Watt) into the fitting. Note that the bulb is not included.
- Securing: Secure the light fitting according to manufacturer instructions, ensuring it is firmly in place.
Compatibility:
- Bulb Type: Compatible with GU10 bulbs.
- Max Wattage: Supports bulbs up to 7 Watts.
- Max Voltage: Rated for 240 Volts.
- Surface Type: Suitable for driveways, paths, and other paved outdoor areas capable of accommodating a recessed fixture and supporting vehicle weight.
Care:
- Cleaning: Regularly clean the surface of the light with a soft, damp cloth. Avoid abrasive cleaners that could damage the finish.
- Maintenance: Periodically check wiring connections and ensure the fixture remains securely seated. Due to its recessed nature and exposure to elements, professional inspection may be advisable annually.