Best current price£13.69from eBay
Shopping.co.uk recommended and popular offers
eBay£13.69Visit shop Metal Transfer Pump 500Cc With 2.4M Hose - Toolzone KDPHW006
Visit shop
B&Q£14.97Visit shop B&Q - 500Cc Metal Fluid Transfer Pump For OilFuelAnd Water
Visit shop2 offers from £13.69 - £14.97
View price history by clicking the chart icon.
The Toolzone 500cc Metal Transfer Pump is designed for professionals and DIY enthusiasts needing to extract and refill fluids from difficult-to-reach areas. Its durable metal construction ensures longevity and reliable performance for automotive and machinery maintenance. A potential caveat is its 500cc capacity, which may require multiple fills for larger tasks.
| Model Part Number | HW006 |
|---|---|
| Brand | Toolzone |
The Toolzone 500cc Metal Transfer Pump has a capacity of 500cc (approximately 0.5 liters) per full cycle.
It is suitable for oils, fuel, and water. Avoid highly corrosive substances.
While built with a durable metal structure, its 500cc capacity is best suited for commercial or occasional use, and smaller to medium fluid transfer tasks.
Flush the pump with a suitable solvent (like clean kerosene for oil) or clean water after each use. Ensure all residual fluid is removed before storage.
Hoses are typically sold separately or may be included depending on the specific retail package. Please check the product packaging details.
Yes, it can be used to transfer gasoline, but ensure all safety precautions for handling flammable liquids are followed, and clean the pump thoroughly afterward.
The double-action design allows fluid to be transferred during both the pull (upstroke) and push (downstroke) of the handle, making the transfer process faster and more efficient compared to single-action pumps.
Ensure the suction hose is fully submerged in the fluid and that there are no air leaks at the hose connections. Check for any blockages in the suction hose or pump intake.
Verify that the pump has been properly primed. Check the discharge hose for kinks or obstructions. Ensure the fluid viscosity is within the pump's operational range.
Tighten the hose clamps securely. Inspect hoses and pump body for cracks or damage. Replace any damaged components.
Ensure the handle and internal mechanisms are clean and free from debris. If the fluid is very cold or viscous, warming it slightly may ease operation.
Setup: The Toolzone 500cc Metal Transfer Pump is designed for immediate use. Ensure the suction and discharge hoses are securely attached to the pump body. For optimal performance, prime the pump by drawing a small amount of fluid through it before starting the main transfer.
Compatibility: This pump is compatible with most common automotive and workshop fluids, including engine oil, gear oil, transmission fluid, fuel, and water. Avoid using it with corrosive chemicals or solvents unless specifically stated as safe by the manufacturer. Ensure the diameter of the suction hose is appropriate for the fluid being transferred and the intended opening.
Care: After each use, it is recommended to flush the pump with a suitable cleaning solvent (e.g., clean kerosene or diesel for oil, fresh water for water-based fluids) to remove any residual fluid and prevent contamination. Store the pump in a clean, dry place. Periodically check the hose connections for leaks and ensure the internal mechanisms are free from debris.
