SIP Dirty Water Pump - SUB 3075
Best current price£81.57from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£81.57Visit shop SIP SUB 3075 Submersible Dirty Water Pump 750W 14100L/hr Float Switch
Visit shopAmazon£81.57Visit shop All Offers
8 offers from £81.57 - £86.00
View price history by clicking the chart icon.
AmazonSIP SUB 3075 Submersible Dirty Water Pump 750W 14100L/hr Float Switch
Free delivery in 1–3 days
£81.57
Visit shop
eBaySIP SUBMERSIBLE WATER PUMP CLEAN DIRTY 750W 14,100LPH AUTOMATIC FLOOD PUMP 06888
Free delivery in 1–3 days
£81.59
Visit shop
SIP SUBMERSIBLE WATER PUMP CLEAN DIRTY 750W 14,100LPH AUTOMATIC FLOOD PUMP 06888Free delivery in 1–3 days£81.59Visit shop →
SIP SUB 3075 Dirty Water Pump - 750W - 14100 L/hr - 8m Head - 35mm Particle Capacity - BlueFree delivery in 1–3 days£86.00Visit shop →
Product Information
Full details
The SIP SUB 3075 Dirty Water Pump is designed for homeowners and light commercial users who need a reliable solution for clearing flooded basements, cellars, or collection tanks. It offers a powerful 750W motor capable of moving up to 14,100 liters of water per hour, though users should note it is intended for intermittent use rather than continuous heavy-duty industrial operation.
All features
| Model Part Number | SUB 3075 |
|---|---|
| Brand | SIP |
Extended Product Information
FAQs
Can this pump be used in a salt water environment?
This pump is designed for fresh or dirty water. Exposure to salt water may cause premature corrosion of internal components.
What is the maximum depth the pump can be submerged?
The pump can operate effectively at depths up to the limit of its 8-meter pumping head.
Is the discharge hose included?
No, the discharge hose must be purchased separately based on your specific length and connection requirements.
Can the pump handle solids larger than 35mm?
No, attempting to pump solids larger than 35mm may cause the impeller to jam or the motor to fail.
Does the pump require regular lubrication?
The motor features a sealed design and does not require manual lubrication.
Can I use an extension lead with this pump?
Yes, but ensure the extension lead is rated for outdoor use and matches the voltage requirements of the pump to avoid power loss.
Troubleshooting
Pump fails to start
Check the power supply, ensure the RCD hasn't tripped, and verify that the float switch is in the 'up' (on) position.
Motor is running but no water is flowing
Check for airlocks in the discharge hose or ensure the pump is not completely clogged with debris.
Pump stops unexpectedly
The thermal cut-out may have triggered due to overheating; allow the pump to cool down and check if the intake is blocked.
Pros and Cons
Pros
- High flow rate of 14,100 liters per hour
- Handles debris up to 35mm without clogging
- Float switch prevents motor burnout
- Generous 10-meter power cable for flexible placement
- Compact and easy to transport
Cons
- Not suitable for continuous duty applications
- Designed primarily for intermittent use only
- Requires manual placement for optimal depth detection
Setup, Compatibility & Care
To set up the pump, ensure the discharge hose (not included) is securely attached to the outlet using the appropriate connection. Place the pump on a level, stable surface at the bottom of the area to be cleared; if the floor is soft or muddy, place the unit on a brick or flat platform to prevent it from sinking.
Compatibility: This model is compatible with standard drainage hoses. Always ensure your power source is protected by a residual current device (RCD).
Care and Maintenance:
- After each use, flush the pump with clean water to remove any residual silt or debris.
- Inspect the power cable periodically for cuts or abrasions.
- Ensure the float switch moves freely and is not obstructed by debris.
- Store the unit in a dry, frost-free location during winter months.