Diall White 12.5mm Straight Pvc External Edge Tile Trim

You will need a measuring tape, a saw or cutting tool, adhesive suitable for PVC, and a damp cloth for cleaning.

This trim is designed for tiles up to 12.5mm thick. Always check the thickness of your tiles before purchasing.

Use a fine-toothed saw or a suitable cutting tool designed for PVC. Ensure accurate measurements before cutting.

Use an adhesive that is specifically designed for PVC and suitable for use with tiles. Follow the adhesive manufacturer's instructions.

Clean the trim with a mild detergent and a damp cloth. Avoid using abrasive cleaners or solvents.

It is generally not recommended to paint the trim. The PVC material may not hold paint effectively. Choose a color that matches your design.

If the trim is damaged, it can be replaced. Remove the damaged section and install a new piece, following the installation instructions.

Ensure the correct adhesive is used and that the surfaces are clean. Allow adequate time for the adhesive to cure.

Check that the tiles are level and the trim is properly aligned during installation. Adjust as needed.

Accurately measure the edge before cutting. If the trim is too short, you may need to replace it or use multiple pieces.

Use the correct amount of adhesive and wipe away any excess immediately. Consider using a color-matched sealant.