Godox iT30Pro Mini iFlash - Black

The Godox iT30Pro has a guide number of 15 meters at ISO 100.

On a full charge, the 7.4V / 900mAh lith battery provides approximately 560 full-power flashes.

Yes, the iT30Pro features a 2.4GHz wireless X system that allows it to function as both a Master and Receiver for wireless triggering and control.

Yes, the Godox iT30Pro supports high-speed sync, allowing for shutter speeds faster than your camera's standard sync speed.

The flash is charged via a USB-C port. You will need a compatible USB-C cable and power source.

The flash duration ranges from 1/1000s to 1/30,000s, offering flexibility for capturing motion.

Yes, you can control power manually in increments of ±3 EV in 1/3-stop adjustments, or use TTL mode for automatic exposure.

Ensure the flash is powered on and has sufficient battery charge. Check that the flash is properly seated in the camera's hot shoe or that the wireless connection is active and correctly configured. Verify that the camera's shutter is open and not in a state that prevents flash firing (e.g., bulb mode without HSS).

Check for any ambient light affecting the TTL sensor. Use the flash's exposure compensation feature to adjust output. Ensure the camera's exposure settings (aperture, shutter speed, ISO) are appropriate for the scene. Clean the camera's hot shoe contacts and the flash's contacts.

Ensure both Master and Receiver units are set to the same channel and group. Check that the distance between units is within the 100m range. Remove any potential sources of interference (e.g., other 2.4GHz devices). Try restarting both units.

Ensure the battery is fully charged. Using lower power settings will result in faster recycle times. If the issue persists at full power after a full charge, the battery may be degraded.

Try turning the flash off and on again. Ensure your fingers are clean and dry when interacting with the touchscreen. If the issue persists, contact customer support.