Best current price£54.17from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£54.17Visit shop Startech.com Dual-Bay Usb 3.0 To Sata Hard Drive Docking Station. Usb
Visit shop
Amazon£61.26Visit shop StarTech Dual-Bay USB 3.0 2.5/3.5in SATA HDD/SSD Dock, 5Gbps (SDOCK2U33V) | SATA I/II/III, Hot-swap, Top-loading toaster-style with drive doors, Tool-less, 15,000-cycle rated, Includes 4ft USB-A cable
Visit shop13 offers from £54.17 - £119.99
View price history by clicking the chart icon.
This StarTech.com Dual-Bay USB 3.0 to SATA Hard Drive Docking Station (SDOCK2U33V) is designed for IT professionals and power users who need quick access to multiple 2.5" or 3.5" SATA HDDs or SSDs. Its key benefit is enabling fast data transfers up to 5Gbps and supporting simultaneous access to two drives, simplifying tasks like disk imaging, data recovery, and backups. A potential caveat is that its maximum performance with UASP requires a UASP-compatible host system.
| Series | USB 3.0 |
|---|---|
| Model Part Number | SDOCK2U33V |
| Brand | StarTech.com |
Yes, the docking station supports both 2.5" and 3.5" SATA HDDs and SSDs. Each drive bay is designed to accommodate either form factor.
Yes, the docking station supports hot-swapping, meaning you can insert or remove drives while the computer is running, provided the operating system supports it.
UASP (USB Attached SCSI Protocol) is a command set that allows for faster data transfer. It is supported by newer operating systems (Windows 8 and later, macOS 10.8 and later) and does not require separate software installation, but your host computer must also support it.
The docking station has been tested with drives up to 10TB at 7200rpm. Larger capacity drives may also be compatible, depending on the drive manufacturer and operating system support.
No, the docking station is OS independent and designed for plug-and-play operation. No drivers or software installation are required.
The package includes the docking station, an AC adapter with interchangeable plugs (UK/EU/NA/ANZ), a USB cable, and a user guide.
No, this docking station does not support RAID configurations. It is designed for individual drive access and management.
Ensure the USB cable and power adapter are securely connected to both the dock and the computer/outlet. Verify the drive is properly seated in the bay. Check if the drive is formatted and initialized by the operating system. Try a different USB port on your computer. Test the drive with another method if possible.
Confirm you are using a USB 3.0 or higher port on your computer. Ensure the UASP driver is enabled on your host system for maximum performance. Check that the connected drive itself is not a bottleneck (e.g., an older, slow HDD). Close unnecessary applications that may be consuming system resources.
Check the power indicator light on the dock. Ensure the drive is formatted and assigned a drive letter in Disk Management (Windows) or Disk Utility (macOS). Verify the drive is compatible with the SATA interface and size requirements.
Ensure the power adapter is providing stable power. Check the USB cable for damage and ensure it's fully seated. Avoid excessive physical movement of the dock or cables while in use. Update USB drivers on your computer.
Setup:
Compatibility:
Care:
